OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

OBDSTAR MT502 Test Platform can support power on, test, and verify most brands of electric scroll compressors by sending a CANBUS signal. It adopts the latest 3.0 APK operating platform to help automotive technicians to do maintenance.

This is a demo of using OBDSTAR MT502 to test the Tesla Model Y compressor by the bench. 

Tools Required

OBDSTAR MT502

Main cable

P004 adapter

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Tesla Model Y compressor

*Note: please ensure the MT502 test platform is in charging and communication during the process.

Procedure 

Test platform >> Agree >> Compressor >> Latest version >> Brand >> Tesla >> Tesla Model-Y SANDEN 1582668-00-F

Connect according to Guide & Pinout at the bottom left of the screen.

After the harness connection is completed, press "Start".

As we can see, it's normal for the current range to fluctuate a little around 330V.

Turn on the ignition and press "Start".

The test command has been sent.

Now we can observe the change in voltage and current.

Press "Stop" and turn off the ignition.

The compressor driver test is completed.

Video Guides:

www.obd2shop.co.uk

KTM 1190 Adventure 2014 odometer calibration via OBDSTAR MS80

This article will show you how to use OBDSTAR MS80 motorcycle diagnostic tool to adjust the mileage for the KTM 1190 Adventure 2014.

First, we can see that the mileage displayed on this motorcycle's instrument is "61000" KM.

We can also check the current mileage of the motorcycle through the MS80 tool, the operation path is as follows:

Enter MOTO Diag, enter "KTM" in the search box, and select "KTM V31.18" >> "Diagnosis" >> "Select from vehicle".

Select "1190 Adventure" and click "OK" to continue.

Select "Chassis management system">>"Eldor MCU(2013-)>>"ECU information".

Here you can see that the current mileage of this car is "60992".

Next is the mileage adjustment process.

Click "Back" to go back to the main interface, click "ODO Meter" >> "KTM V31.04" >> "Select from vehicle (BETA)".

Also, select "1190 Adventure" and click "OK" to continue.

Select "One-click Repair" and enter the new mileage, here we enter "20000".

The mileage has been set successfully!

The video for reference:

Hyundai/Kia 95910 N7070 Airbag Reset by OBDSTAR P50

This article will guide you on how to use OBDSTAR P50 to reset Hyundai/Kia airbag 95910 N7070 in bench mode.

The tools we need:

Hyundai/Kia Airbag ECU

P50 tablet

Main Cable

P004 Adapter

CANFD Adapter

P004 Jumper

Select "Airbag Reset" >> "Airbag Reset V30.33" >> "Manual Select Model" >> "HYUNDAI/KIA" >> "Auto Search Part Number", then click "Enter" to continue.

Check the part number on the ECU label

Input the part number of ECU (case insensitive, fuzzy search supported)

After entering the part number, select "Enter" to continue.

Press "ESC" to enter CONFIG mode.

Remarks: click the operation instructions at the bottom left to check the best detection method.

Then choose "Pinout", connecting according to the wiring diagram.

Once the device is connected, click on "ECU Information" to view the relevant information.

Then return to the previous interface and click "Read DTC" to check the error code, there is a crash error code.

Then we choose "Erase Crash", this function is available by connecting the server, please make sure the internet connection is normal.

Erase Crash Success, please disconnect the 12v power supply and wait for 30 seconds, and then reconnect the 12v power supply.

Then return to the previous interface and click "Read DTC" again, the crash history has been erased successfully.

The airbag reset is done!

For more detailed steps, please refer to the video:

OBDSTAR X300M Mileage Adjustment on 2011 VW Polo

OBDSTAR X300M Tool is able to do mileage adjustments for the 2011 Volkswagen Polo by OBD successfully. The dash odometer now is 67225km. Next, I'm going to show you guys how easy to correct it.

Plug X300 main cable into OBD2 port, 

Vehicles >> Cluster Calibrate >> VW >> VW V31.74 >> Select from vehicle >> Polo >> 2010(NEC+24C32) >> Read write mileage >> Mileage Adjustment

Please turn the ignition on, and press ENT to continue.

Reading data...

Please enter a filename to save.

The current mileage of 67200km? Press ENTER to continue.

Please input the mileage of the adjustment: 68941km

Confirm the value.

Please turn the ignition on. Press ENT to continue.

Writing data...

Adjustment complete.

As you can see, the dash odometer has already changed.

OBDSTAR X300M Mileage Adjustment on the 2011 VW Polo was done! You may follow the procedure to correct mileage for other models.

Read also:

VW Passat B6/B7/CC Mileage Adjustment via Obdstar X300M

Benz ML Series W164 Mileage Correction via Obdstar X300M

Audi A6 2006 2.7D Mileage Correction via Obdstar X300M

OBDSTAR P50 Reset Toyota 89170-0E080 Airbag on Bench

This is a tutorial on how to use OBDSTAR P50 Airbag Reset Tool on bench. Taking the Toyota 89170-0E080 airbag ECU as an example. Read this article to learn how it works.

Accessories Required

OBDSTAR P50

Toyota 89170-0E080 Airbag ECU

P004 Adapter

P004 Jumper

Main cable

Note: Please keep OBDSTAR P50 in charging and communication throughout the whole process.

Airbag reset >> Latest version >> Auto Search part number

This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".

Check the part number on the ECU label to search for it.

Note: before repairing the airbag computer, please carefully check "Operation Instructions" at the bottom left to check the best detection method.

Connect according to the wiring diagram.

Turn on the P004 Adapter ignition switch to check ECU info.

We can see the "Crash Recorded" is YES.

Go to read DTC, there's a crash fault.

Read FLASH(H8SX172x) >> Start

Save the data file.

Click "Erase Crash".

Executing the "Erase Crash" function will clear all flash data. Please ensure that the "Read FLASH" function has been executed. And open the cover to compare all write flash mode wiring diagrams in the "Operation Instructions". There is a picture that can correspond to your ECU.

Otherwise, after executing this function, flash data can only be recovered through the programmer.

Enter >> Enter

Erase crash success. Please follow the wiring diagram of write flash mode, and execute the "Write FLASH" function after removing/welding the resistance.

Turn on the P004 Adapter ignition switch again.

Advanced function >> write FLASH(H8SX172x)

Confirm that the "Write FLASH" operation has been performed after removing/welding the resistance according to the write flash mode wiring diagram.

Enter >> Enter >> Selected data file >> Start

Writing data success.

Please disconnect the 12V power supply of P004(or turn off the ignition) and wait for the 30s, then reconnect the 12V power supply of P004(or turn on the ignition).

Go to erase DTC, then check ECU info again.

As we can see, the "Crash Recorded" has been changed to NO.

The crash fault has been cleared.

The airbag reset is done.

You can also click the video below to view the tutorial:

You might be interested:

OBDSTAR P50 Reset Subaru 98221SG080 Airbag on Bench

OBDSTAR P50 Reset Toyota 89170-60460 Airbag on Bench

OBDSTAR Added Toyota Lexus 8A 4A Add Key & AKL by OBD

OBDSTAR has released Toyota & Lexus IMMO upgrade V32.74, added new models 8A-A8, 8A-A9, 8A-AA, 4A all series add keys & all keys lost key programming by OBD. Works for OBDSTAR X300 DP PLUS, X300 PRO4. No adapter is required or disassembly supports keys from all manufacturers with free Pincode.

Program 2020 Lexus UX300E 8A-AA Key by OBD

Tools:

Key Master DP Plus

Main cable

Key SIM

CAN Direct Kit

Connect Toyota-27 with smart box, and connect CAN direct with OBD.

Operation:

Car IMMO >> Asia >> Lexus Toyota Scion >> Latest version >> Manual select system >> Proximity >> Type 9(8A-AA) >> Read IMMO data >> Operation in the car(CAN DIRECT KIT)

Please connect the diagnostic device, smart key ecu, and vehicle OBD through the CAN DIRECT KIT.

This function is available by connecting the server, please ensure the Internet connection is normal.

Save immo data file.

Make simulated card(key SIM) >> Enter

1. This function can make a simulated key when all the keys are lost(note: simulated key needs to be kept charged, and it needs to be made again after the power is off);

2. The simulated key can replace the original car key to add keys, erase keys and other operations;

3. Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.

Select the saved file >> Connect Key Sim simulator

Generate simulated card successfully.

Restore smart box cable.

Test the Key Sim close to start button. It can start engine successfully.

Now we can use it as an original key to add more keys.

www.obd2shop.co.uk