Showing posts with label obdstar ecu master manual. Show all posts
Showing posts with label obdstar ecu master manual. Show all posts

Wednesday, 18 November 2026

OBDSTAR ECU Master: Read & Write IVECO ZF GS3.3A TCM

The IVECO ZF GS3.3 A transmission control unit (TCM) uses an ST10F276 microcontroller with a 25LC640 external EEPROM. With OBDSTAR ECU Master, you can read and write both the internal FLASH and the external EEPROM on the bench. This guide walks through the whole process.


Tools You Need:

A computer

OBDSTAR ECU Master

A high-power DC regulated power supply

USB cable

Jumper wires

IVECO ZF GS3.3 A ST10F276+25LC640 TCM

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-1

Step 1: Select the ECU Model

Open ECU Master and tap [ECU Flasher] > [HD] > [TCM].

Type the ECU model in the search box at the top-right corner.

Select IVECO ZF GS3.3 A ST10F276+25LC640.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-2

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-3

Step 2: Enter Bench Mode and Open the Guide

Tap [Start], then [BENCH], then [OK].

Tap [Guide] to see tips and connection diagrams for the different adapters.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-4

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-5

Step 3: Connect the ECU

Click [ECU Image] to view the ECU picture.

Click [Connector Pinout] for details, and wire the ECU according to the connector wiring diagram.

Tap Connect. When the prompt appears, tap [Yes].

The left panel will show that the ECU has connected successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-6

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-7

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-8

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-9

Step 4: Read the Data

Read Internal Flash

Tap [Read INT FLASH].

Rename the file and choose the save path if you wish.

The left panel will show that the data was read successfully.

Read External EEPROM

Tap [Read EXT EEPROM].

Rename the file and choose the save path if you wish.

The left panel will show that the data was read successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-10

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-11

Step 5: Write the Data

Write Internal Flash

Tap [Write INT FLASH].

Select the corresponding data file.

When prompted to verify the checksum, tap [No].

The left panel will show that the data was written successfully.

Write External EEPROM

Tap [Write EXT EEPROM].

Select the corresponding data file.

The left panel will show that the data was written successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-12

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-13

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-14
Helpful Tips

Always back up the original flash and EEPROM data before writing anything.

Use a stable regulated DC power supply during the whole process. Power interruptions while writing can damage the ECU.

Double-check every wire against the Connector Pinout diagram before tapping Connect.


Video Guide

Watch the full operation here:


Looking for OBDSTAR ECU Master and other ECU programming tools? Visit www.obd2shop.co.uk.

Monday, 26 October 2026

How to Read and Write MB Benz Bosch MP4 Data with OBDSTAR ECU MASTER

OBDSTAR ECU MASTER supports reading and writing data for the MB Benz Bosch MP4 (TCM) equipped with MPC5566 and 95640. This guide explains the bench connection process, internal flash and external EEPROM data operations, and VIN writing.


1. Required Tools

Prepare the following tools before starting:

Computer

OBDSTAR ECU MASTER

High-power DC regulated power supply

USB cable

Jumper wires

MB Benz Bosch MP4 (TCM) MPC5566 + 95640


how-to-read-and-write-mb-benz-bosch-mp4-data-1

2. Select the ECU Model

Open ECU Flasher.

Select HD > TCM.

Use the search box in the top-right corner to find the corresponding ECU model.

Select MB BENZ MP4 MPC5566+95640.


how-to-read-and-write-mb-benz-bosch-mp4-data-2

3. Enter Bench Mode and Check the Wiring Diagram

Tap Start > BENCH > OK.

Tap Guide to view helpful instructions and connection diagrams for different adapters.

Open ECU Image, then click Connector Pinout to check the connector pinout details.

Connect the ECU to the device according to the wiring diagram.


how-to-read-and-write-mb-benz-bosch-mp4-data-3

how-to-read-and-write-mb-benz-bosch-mp4-data-4

how-to-read-and-write-mb-benz-bosch-mp4-data-5

4. Connect to the ECU

After completing the wiring, tap Connect.

When the confirmation prompt appears, tap Yes.

Check the left panel to confirm that the ECU has connected successfully.


how-to-read-and-write-mb-benz-bosch-mp4-data-6

how-to-read-and-write-mb-benz-bosch-mp4-data-7

how-to-read-and-write-mb-benz-bosch-mp4-data-8

how-to-read-and-write-mb-benz-bosch-mp4-data-9

5. Read and Write Internal Flash and External EEPROM Data

Read Internal Flash

Tap Read INT FLASH (MPC5566).

Rename the file if needed and select the save path.

Wait for the operation to finish and confirm that the left panel displays a successful read message.


Read External EEPROM

Tap Read EXT EEPROM (95640).

Rename the file if needed and select the save path.

Wait for the device to confirm that the data has been read successfully.


Write Internal Flash

Tap Write INT FLASH (MPC5566).

Select the corresponding data file.

Tap Yes to confirm.

Wait for the successful write message.


Write External EEPROM

Tap Write EXT EEPROM (95640).

Select the corresponding data file.

Tap Write and wait for the operation to complete successfully.


how-to-read-and-write-mb-benz-bosch-mp4-data-10

how-to-read-and-write-mb-benz-bosch-mp4-data-11

how-to-read-and-write-mb-benz-bosch-mp4-data-12

how-to-read-and-write-mb-benz-bosch-mp4-data-13

how-to-read-and-write-mb-benz-bosch-mp4-data-14

how-to-read-and-write-mb-benz-bosch-mp4-data-15

Note: Save backup copies of the original internal flash and external EEPROM data before writing. Ensure the selected files match the ECU, and keep the power supply and wiring stable throughout the process.


6. Write a New VIN

Enter Special Functions and tap OK.

Enter the new VIN.

Tap OK to confirm.

Check the device screen for the message “Write successful”.


how-to-read-and-write-mb-benz-bosch-mp4-data-16

how-to-read-and-write-mb-benz-bosch-mp4-data-17

how-to-read-and-write-mb-benz-bosch-mp4-data-18

how-to-read-and-write-mb-benz-bosch-mp4-data-19

Video Guide

For a visual demonstration of the complete procedure, watch the following video:


Visit www.obd2shop.co.uk for more automotive diagnostic and ECU programming solutions.

Wednesday, 30 September 2026

Kawasaki Mitsubishi 21175-1124 MH8115F ECU Flash Read/Write Guide

This post demonstrates how to use OBDSTAR ECU MASTER to read and write the internal flash data of the Kawasaki Mitsubishi 21175-1124 MH8115F Engine Control Module, with checksum support.


Required Tools:

Computer

ECU MASTER

High-Power DC Regulated Power Supply

USB Cable

Jumper Wires

Kawasaki Mitsubishi 21175-1124 MH8115F ECU

kawasaki-mitsubishi-ecu-flash-read-write-guide-1

ECU Flash Read/Write Procedure

1. Select the ECU

Open ECU Flasher and select:

MOTO → ECM

Search for 21175-1124 and select the corresponding ECU option.


2. Select Bench Mode

Click [Start] and select Bench Mode.

Then click [Guide] to check the following information:

Warm Reminder

Menu Description

Operation Guide

Special Notes

Connection Methods

kawasaki-mitsubishi-ecu-flash-read-write-guide-2

kawasaki-mitsubishi-ecu-flash-read-write-guide-3

kawasaki-mitsubishi-ecu-flash-read-write-guide-4

3. Check the ECU Pinout

Return to the main screen and click [ECU Image] to confirm that the ECU appearance matches the guide.

Then click [Connect Pinout] and connect the jumper wires according to the provided pinout diagram.

kawasaki-mitsubishi-ecu-flash-read-write-guide-5

kawasaki-mitsubishi-ecu-flash-read-write-guide-6

4. Connect to the ECU

After completing the wiring, return to the main screen and click [Connect].

Once the ECU connects successfully, you can perform INT FLASH read/write operations.


5. Read INT FLASH

Click [Read INT FLASH].

You can customize the file name before saving. The save path is displayed on the left side of the screen.

After the process is completed, the ECU data backup is saved successfully.

kawasaki-mitsubishi-ecu-flash-read-write-guide-7

kawasaki-mitsubishi-ecu-flash-read-write-guide-8

6. Write INT FLASH

To write the backup data back to the ECU, click [Write INT FLASH] and select the previously saved backup file.

Confirm the selected file is correct, then click [Yes] to start writing.

Once completed, the data will be written successfully to the module.

kawasaki-mitsubishi-ecu-flash-read-write-guide-9

kawasaki-mitsubishi-ecu-flash-read-write-guide-10

Conclusion

With ECU MASTER, the Kawasaki Mitsubishi 21175-1124 MH8115F ECU can be connected in Bench Mode for INT FLASH data reading and writing, with checksum support.


Watch the complete operation here:


www.obd2shop.co.uk

Wednesday, 23 September 2026

How to Read and Write Ford ECU Data with OBDSTAR ECU MASTER

This guide demonstrates how to read and write data for the Ford Continental/Siemens VDO SID212EVO TC297 Engine ECU using OBDSTAR ECU MASTER in BENCH mode.


Required Tools:

Computer

OBDSTAR ECU MASTER

High-Power DC Regulated Power Supply

USB Cable

Jumper Wires

Ford Continental/Siemens VDO SID212EVO TC297 ECU

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-1

Step 1: Select the ECU

Open [ECU Flasher] >> [ECM] and search for SID212EVO.

Open [Guide] and carefully check the Warning Reminder, Menu Description, Operation Guide, Special Notes, and Connection Methods before proceeding.

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-2

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-3

Step 2: Connect the ECU

Go back to the main screen and select: [Pinout] >> [BENCH]

Check that the ECU appearance matches the guide, then click [Connector Pinout].

Follow the pinout diagram to connect the jumper wires correctly.

Once all connections are completed, return to the main screen.

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-4

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-5

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-6

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-7

Step 3: Read ECU Data

Select: [Start] >> [BENCH]

Connect the ECU. After the connection is successful, click [Read MAPS (TC297)].

Enter a file name if required. The save path will be displayed on the left.

The ECU data reading is then completed.

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-8

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-9

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-10

Step 4: Write ECU Data

To write the saved data back to the ECU, click [Write MAPS (TC297)].

The CS button indicates checksum support. Select the file you saved earlier.

The device will ask whether to perform a checksum:

Select Yes if the data has been modified and you want to verify the checksum before writing.

Select No if the data has not been modified and you want to write it directly.


When Write successful appears, the data writing process is complete.

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-11

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-12

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-13

how-to-read-and-write-ford-ecu-data-with-obdstar-ecu-master-14

That's the complete procedure for reading and writing Ford SID212EVO TC297 ECU data with OBDSTAR ECU MASTER.


Video Guide

Watch the video tutorial for the complete operation:


www.obd2shop.co.uk


OBDSTAR ECU Master: Read & Write IVECO ZF GS3.3A TCM

The IVECO ZF GS3.3 A transmission control unit (TCM) uses an ST10F276 microcontroller with a 25LC640 external EEPROM. With OBDSTAR ECU Maste...