OBDSTAR Coming Soon: MG1/MD1 ECU Read/Write & Unlock

OBDSTAR will soon release a major software update for Locked MG1/MD1 ECU Read/Write & Unlock. The new function will be available for the following OBDSTAR devices:

OBDSTAR X300 Classic G3

OBDSTAR DC706

OBDSTAR ECU MASTER C

Supported ECUs

The upcoming update will support the following Bosch ECUs:

Bosch MD1CP032 (BMW B57) TC299

Bosch MG1CS024 (BMW B48/B58) TC298

Bosch MG1CS201 (BMW B48/B58) TC298

Bosch MD1CS069 (FCA) TC299

Bosch MD1CP006 (Ford) TC298

Bosch MD1CS089 (ISUZU, etc.) TC299 (Only supported by ECU MASTER C)

More vehicle models will be added in future updates.

Note: This function requires the RH850/V850 Adapter Kit (C4-06 Adapter).

Stay tuned for the official software release and more supported models from OBDSTAR.

www.obd2shop.co.uk

VOLVO SOD RADAR ECU Unlock & Reset Virgin with OBDSTAR X300 Classic G3

In this guide, we will demonstrate how to use the OBDSTAR X300 Classic G3 to perform ECU Unlock and Reset Virgin functions for the VOLVO SOD RADAR system. This procedure applies to both the left and right radar modules.

Preparation

Before starting, make sure you have the following:

X300 Classic G3 device

Main cable

Vehicle ready and properly connected via OBD

Step-by-Step Operation

1. Connect the X300 Classic G3 to the vehicle via OBD.

2. On the device, tap:

[ECU Advanced]

Select [VOLVO]

 

3. Tap [Guide] and carefully read:

Background information

Function introduction

Menu description

4. Tap [Back] to return to the menu.

5. Navigate through the following options:

Select [SOD RADAR]

Select [LEFT RADAR]

Select [OBD]

6. Execute [ECU Unlock]

Wait for the system to confirm operation success

7. Execute [Reset Virgin]

Wait for the system to confirm operation success

Repeat for Right Radar

Perform the same steps for the RIGHT RADAR module.

Video Guide

For a complete visual walkthrough, watch the video below:

More Information visit:

www.obd2shop.co.uk

Mercedes-Benz W221 Dashboard Programming with OBDSTAR X300 Classic G3

In this article, we demonstrate the advanced ECU programming function of the OBDSTAR X300 Classic G3 (Keymaster G3), illustrating how to quickly program a used instrument cluster from a Mercedes-Benz S-Class W221 model. This function allows you to restore a used instrument cluster to factory settings and complete its programming.

Important: Before starting any operation, make sure the main cable is properly connected to the vehicle to avoid communication errors.

Step 1: Enter the Dashboard Programming Menu

1. On the KeyMaster G3 device, navigate through the following path:

[ECU Advanced] → [MB BENZ] → [DASHBOARD] → [S-CLASS] → [W221]

2. Tap [Guide] and carefully read the function introduction and menu descriptions to understand the operation process and precautions.

3. Next, retrieve [ECU Info.] to confirm the hardware and software part numbers of the dashboard, ensuring compatibility before proceeding.

Step 2: Back Up the EEPROM Data

Before performing any modifications, it is strongly recommended to back up the original data.

1. Select [EEPROM Backup]

2. Tap [Start] to begin backing up the data

3. You can customize the filename of the saved backup file for easier identification later

This backup file is critical and will be used in the following steps, so make sure it is saved correctly.

Step 3: Virginize the Used Dashboard

Now, execute the [Virgin Dashboard] function.

1. Carefully select the correct backup file

2. Double-check the file before confirming

3. Tap [OK] to proceed

Once completed, the used dashboard will be restored to factory (virgin) status:

1. The mileage will be initialized to its initial display state

2. The SSID synchronization code will be cleared

Step 4: Program the Dashboard

After virginizing the dashboard, proceed with the dashboard programming function.

When the device displays [Programming complete], it means the used Mercedes-Benz W221 dashboard has been successfully programmed and is ready for use.

For a full step-by-step visual demonstration, please watch the video guide:

Visit our website for more professional automotive diagnostic tools and tutorials: www.obd2shop.co.uk

OBDSTAR IMMO Update: Add FIAT, VW, FORD & BYD Models(2024)

The latest OBDSTAR AUTO IMMO Software Upgrade introduces advanced key programming functions for FIAT, VW, FORD, and BYD/YANGWANG vehicles. Compatible with tools like X300 Classic G3, X300 PRO4, and X300 MINI series. Details are as follows:

FIAT [Version: V43.14]

1. Add a proximity key programming function for the following model:

 FIAT SOUTH AMERICA FREEMONT 2011-2018

2. Add Blade key programming(DELPHI MQB/Megamos AES)for belowmodels:

 FIAT EUROPE EGEA 2018-2025

 FIAT MIDDLE EAST EGEA 2018-2025

3. Add Blade key programming (MARELLI 70F3378+95160(ID46)70F3633

+95320(ID46)/ MARELLI 70F3238+95320(ID48)70F3237+95160(ID48)) for below models:

 FIAT SOUTH AMERICA NEW PALIO 2011-2018

 FIAT SOUTH AMERICA NEW SIENA 2012-2020

4. Add Blade key programming(CONTINENTAL MPC5606B(ID4A))forbelow models:

 FIAT SOUTH AMERICA MOBI 2018-2020

 FIAT SOUTH AMERICA MOBI 2016-2017

VW[Version:V45.52]

1. Add VW MQB METER Query Historical IMMO Data, ECU Info functions.

2. Optimized software.

FORD[Version:V45.00]

1. Add proximity key programming function for FORD EUROPE FOCUS 2009- 2011.

2. Optimized software.

Supported Tools

KEY MASTER G3

KEY MASTER 5

X300 MINI FIAT

X300 MINI VW

X300 MINI FORD/MAZDA

BYD/YANGWANG [Version: V40.66]

1. Add proximity key programming function for below models:

BYD YUAN UP

BYD SEAL 06

BYD SEAL 07

BYD SEALION 05

BYD SEALION 07

BYD DOLPHIN EV

YANGWANG U8

YANGWANG U9

Supported Tools

KEY MASTER 5

KEY MASTER G3

Stay updated with www.obd2shop.co.uk.

OBDSTAR X300 Classic G3 Porsche Cayenne Battery Programming Guide

Battery replacement or upgrade in modern vehicles like the Porsche Cayenne requires proper coding to ensure accurate battery management. This guide walks you through using the battery programming function of OBDSTAR X300 Classic G3 for Porsche Cayenne models from 2018 to 2023.

Function Overview

The Battery Programming feature allows users to:

Modify battery parameters

Register battery capacity and serial number

Use one-click automatic code setting to update ECU data

Note: Ensure your diagnostic software is updated to the latest version before proceeding.

Step-by-Step Instructions

1. Access the ECU Advanced Menu

Open the [ECU Advanced] module.

Navigate to [Porsche] >> [Porsche V30.00] >> [Battery] >> [Cayenne 2018-2023].

2. Review the Guide Section

Open the [Guide] tab to read background information and menu descriptions.

3. Check ECU Information

Select [ECU Info.] to verify the current battery and control module data.

4. Enter Battery Programming Mode

Open the [Program Battery] function to access the parameter modification page.

5. Modify Battery Parameters

Adjust the battery capacity and serial number as needed.

Double-check all entries for accuracy to avoid errors.

6. Finalize Changes

Tap [OK] to confirm and execute the programming process.

Important Notes

1. Incorrect parameter entries may cause system malfunctions. Always validate data before confirming.

2. This function requires a stable OBD-II connection to the vehicle’s diagnostic port.

For tool compatibility or technical support, visit:

www.obd2shop.co.uk

OBDSTAR ISUZU/HYUNDAI/KIA Cluster Recalibration Upgrade

OBDSTAR has released ISUZU/HYUNDAI/KIA Cluster Recalibration Software Major Upgrade this month. Now it's available on OBDSTAR ODO Master&X300 Classic G3. Please update your device in time for the latest features.

Upgrade Content

ISUZU Version: V40.00 [First Release]

Add mileage calibration function for ISUZU D-MAX YAZAKI.

HYUNDAI/KIA Version: V41.42

Add mileage calibration function for the below models:

HYUNDAI AVANTE TYPE3(MB91F067)

HYUNDAI AZERA TYPE2(2015-NEC+24C16)

HYUNDAI AZERA TYPE5(NEC)

HYUNDAI ELANTRA TYPE1(2022-MB91F061)

HYUNDAI ELANTRA TYPE6(MB91F067)

HYUNDAI ELANTRA TYPE7(NEC)

HYUNDAI GENESIS TYPE7(NEC)

HYUNDAI HB20 TYPE3(NEC)

HYUNDAI I20 TYPE5(NEC)

HYUNDAI 130 TYPE2(MB91F037+93C66)

HYUNDAI IONIQ MB91F06X

HYUNDAI IX35 TYPE2(MB91F037+93C66)

HYUNDAI SANTA FE TYPE1(2021-VIRTUAL MOBIS)

HYUNDAI SANTA FE TYPE3(2019 MB91F06X)

HYUNDAI SANTA FE TYPE5(MB91F067)

HYUNDAI SANTA FE TYPE6(MB91F037+93C66)

HYUNDAI SONATA TYPE4(MB91F061)

HYUNDAI SONATA TYPE5(MB91F062)

HYUNDAI TUCSON TYPE1(2019-RH850)

HYUNDAI TUCSON TYPE5(MB91F037+93C66)

HYUNDAI VELOSTER TYPE7(NEC)

HYUNDAI VERACRUZ TYPE2(NEC)

KIA CADENZA 2013-MB91F037+93C66

KIA CARENS MB91F061

KIA CARENS 4 2013-MB91F037+93C66

KIA CEED TYPE1(2021-VIRTUAL MOBIS)

KIA CEED TYPE3(2018 MB91F061)

KIA CERATO 2018 MB91F061

KIA FORTE 2018 MB91F061

KIA FORTE 2013-MB91F037+93C66

KIA PROCEED 2021-VIRTUAL MOBIS

KIA RIO TYPE3(2018-RH850)

KIA SORENTO TYPE14(MB91F067)

KIA SOUL TYPE1(2019 MB91F061)

KIA SPORTAGE TYPE1(2019-RH850)

KIA XCEED TYPE1(2021-VIRTUAL MOBIS)

KIA XCEED TYPE2(MB91F06X)

Supported Tools

ODO Master

Key Master G3

www.obd2shop.co.uk

OBDSTAR BENZ FBS3 Kit for Read Pincode/Reset ECU/Program Key

New arrival! OBDSTAR BENZ FBS3 Kit is now accepted to pre-order and will be arrived next month. Needs to be used with OBDSTAR X300 Classic G3&MP001 Set for Mercedes-Benz pincode reading, ECU reset virgin/programming, and key programming.

Support Functions

1. Read Pincode

Calculate Pincode(By Work Key)

Calculate Pincode(AKL)

Read BE Key Pincode

2. ECU Reset Virgin/Program

EIS, ECM, TCM, ISM, ELV

3. Program Keys

Read Key's Data

Generate Key File

Erase BE Key

Write BE Key

Support Models

www.obd2shop.co.uk

OBDSTAR X300 Classic G3 Program 2024 Mazda CX-5 All Keys Lost

Today we'll demonstrate how to program the 2024 Mazda CX-5 all keys lost with OBDSTAR X300 Classic G3 by OBD.

Tools Required:

OBDSTAR Key Master G3

2 Blank Keys

Main Cable

Operation

Connect the device to your vehicle with the main cable.

IMMO >> MAZDA >> Latest Version >> Manual Select Model >> CX-5 >> PROXIMITY >> 2018- >> TYPE 1 >> All Smart Keys Lost

All the smart keys out of the car 1 meter away.

Press and hold the vehicle start button for 10s, Start button indicator lights from green to yellow. Press the start button again, and turn on the instrument.

Instruction

All smart keys will be erased.

Mini keys are required: 2

Is ignition status open? Yes

When figuring out how to configure the system, please wait for about 7 minutes. After 7 minutes, the speaker will ring.

Current number of smart keys: 0

Switch the ignition off.

Note:

Turn on the ignition.

When the indicator of the start button turns green(within 5 seconds), attach the marker side of the smart key to the start button!

The current number of keys: 1

The program is successful, do you want to program the next one? Yes

Just repeat the operation as before.

The current number of keys: 2

Press No to continue.

You have to complete the following procedure, before the engine can be started:

1. Switch ignition off.

2. Put on the brakes, turn all the programmed keys to the start button to start the engine for 3s, then switch the ignition off.

Program complete.

Test the keys, both can work successfully.

Done.

www.obd2shop.co.uk