Technical Guide: Yamaha Motorcycle CO Volume Adjustment via MOTOMASTER

Proper CO adjustment helps maintain engine performance and emission standards. Follow these steps to complete the adjustment using your OBDSTAR MOTOMASTER.

Tools Required:

OBDSTAR MOTOMASTER tablet

Step-by-Step Procedure

1. Initial System Entry

Power on your device and tap [DEMO] (or enter via the live diagnostic menu).

Locate and select Yamaha from the list of manufacturers.

Select [Common Special Functions].

Select [Idle Speed Adjustment].

2. ECU Activation

Follow the on-screen prompts to turn the ignition switch OFF and then back ON.

To activate the ECU, select [Temporary Activation].

From the function list, tap [CO volume adjustment 3].

3. Adjusting the CO Values

Carefully read and follow the on-screen safety instructions.

Tap [Change Mode] to enable the adjustment interface.

Select the specific cylinder and adjust the CO value by [Step ON] or [Step down] the levels as required by the engine specifications.

4. Completion

Once the desired levels are set, tap [Back] to save the settings and exit the function.

The system will confirm that the Yamaha CO adjustment is concluded.

Additional Resources

For a detailed visual demonstration, you can view the video guides at:

Support: www.obd2shop.co.uk

New Free Upgrade: OBDSAR TCM Cloning for DQ38X/DQ500 GEN2

OBDSTAR has just released a powerful FREE software upgrade for the KeyMaster G3 and DC706, significantly expanding its TCM (Transmission Control Module) cloning capabilities. This update focuses on the high-demand Bosch and ZF GEN2 series, making maintenance and repair even easier for professional workshops.

Key Highlights of the Update:

1. Comprehensive Support for BOSCH GEN2

Users can now perform Data Read/Write, Mileage Calibration, and IMMO Data Decryption (Exclusive) via Bench Mode for the following models:

DQ380 (0DE/0GC)

DQ381 (0DE/0GC)

DQ500 (0DL)

Recommended Wiring Cable: TCM-005

2. Enhanced ZF Support

The update also includes Data Read/Write functionality for:

ZF AL552 GEN2

Recommended Wiring Cable: TCM-024

Supported Vehicle Brands:

This update covers a wide range of VAG group vehicles and luxury brands, including:

Volkswagen & Audi

Skoda & Bentley

Lamborghini & Porsche

Technical Specs:

Supported Bootloader Version: BH1G0401

Method: Bench Mode (No need to disassemble the unit, ensuring a safer and faster process).

How to Get the Update?

This is a FREE upgrade for all active KeyMaster G3 and DC706 users. Simply connect your device to Wi-Fi and run the update manager to download the latest software version.

Upgrade today and stay ahead in the world of advanced TCM programming!

www.obd2shop.co.uk

2021 Ducati Diavel 1260 PIN Code Reset Function Procedure

Background

PIN Code Overview

The DUCATI PIN code is a 4-digit security password designed for immobilizer (IMMO) protection and anti-theft data programming.

Its main functions include:

1. Emergency Unlock

If the key transponder fails, the smart key battery is dead, or the immobilizer system malfunctions, the PIN code can be entered via the dashboard to unlock and start the vehicle.

2. Security Protection

Factory default PINs (e.g., 0000) are typically generic. Users are strongly advised to change the PIN to a personalized code via the dashboard menu to prevent unauthorized access.

3. System Recovery

If the PIN is lost or not properly stored, the vehicle may be unable to start or access certain dashboard functions. In such cases, the PIN Code Reset function must be performed using a diagnostic tool.

Preparation

Required tools:

MOTOMASTER Diagnostic Tool

M001A Adapter

M041 Cable

Solution

Use OBDSTAR MOTOMASTER to perform the [PIN Code Reset] function and restore the default PIN.

Detailed Procedure

Step 1: Enter Diagnosis Menu

Select:

[MOTO Diag] → [DUCATI] → Latest Version → [Diagnosis]

Step 2: Select Model

Choose:

[By Model]

Step 3: Select Vehicle Information

Follow this path:

[D]

[Diavel 1260 E5]

[1262]

[MY 21]

Step 4: Manual Selection

Click:

[Manual Selection]

Step 5: Enter System

Select:

[Hands Free (Smart Key)] → [Enter]

Step 6: Access Special Function

Click:

[Special Function]

Enter password: 123

Click [OK]

Step 7: Reset PIN Code

Select:

[PIN Code Reset]

Step 8–9: Confirm Operation

Click [OK] to confirm each prompt.

Step 10: Completion

Operation completed successfully.

The PIN code has now been reset.

You can now proceed to set a new PIN via the dashboard.

Manual PIN Change Procedure

After resetting, follow these steps to set a new PIN:

1. Turn the ignition switch to the ON position.

2. Wait for the dashboard home screen.

3. Press and hold the MENU ENTER button on the left handlebar to access the menu.

4. Select [PIN CODE]

5. Enter the default PIN: 0000

6. Set your new PIN code to complete the process

Summary

The PIN code is essential for immobilizer security and emergency access.

If the PIN is lost or invalid, use MOTOMASTER to reset it.

Always set a personalized PIN after resetting to ensure vehicle security.

Important:

Please strictly follow the prompts on your diagnostic device during the operation process to avoid errors.

www.obd2shop.co.uk

OBDSTAR Marine Diagnostic Software Upgrade: New BRP Support Added

OBDSTAR has released a significant upgrade to its marine diagnostic software, introducing new BRP support.

BRP Software Functions:

1. Supports IMMO and service functions for all models up to 2025.

2. Supports CDID diagnostics for 2014 and newer models, allowing users to view specific model, year, version, configuration, and other details.

3. Adds the following special functions:

Set Engine Serial Number

Set Vehicle Total Hours

Set VIN

Reset Last Maintenance

Set Vehicle Model Number

Configure Keys

Set Customer Name

Set Delivery Date

Configure iBR (Lock/Unlock Calibration)

Supported Tools:

MarineMaster

ISCAN SEA-DOO (MARINE)

D800

MS80

D700

ISCAN BRP

Software updates may vary depending on product configurations.

For more details, please contact:

www.obd2shop.co.uk

VOLVO SOD RADAR ECU Unlock & Reset Virgin with OBDSTAR X300 Classic G3

In this guide, we will demonstrate how to use the OBDSTAR X300 Classic G3 to perform ECU Unlock and Reset Virgin functions for the VOLVO SOD RADAR system. This procedure applies to both the left and right radar modules.

Preparation

Before starting, make sure you have the following:

X300 Classic G3 device

Main cable

Vehicle ready and properly connected via OBD

Step-by-Step Operation

1. Connect the X300 Classic G3 to the vehicle via OBD.

2. On the device, tap:

[ECU Advanced]

Select [VOLVO]

 

3. Tap [Guide] and carefully read:

Background information

Function introduction

Menu description

4. Tap [Back] to return to the menu.

5. Navigate through the following options:

Select [SOD RADAR]

Select [LEFT RADAR]

Select [OBD]

6. Execute [ECU Unlock]

Wait for the system to confirm operation success

7. Execute [Reset Virgin]

Wait for the system to confirm operation success

Repeat for Right Radar

Perform the same steps for the RIGHT RADAR module.

Video Guide

For a complete visual walkthrough, watch the video below:

More Information visit:

www.obd2shop.co.uk

MB FBS3/FBS4 TCM OBD Virginization Solution

OBDSTAR is set to release a powerful new function that enables OBD virginization for Mercedes-Benz FBS3 and FBS4 transmission control modules (TCM). This upgrade will be supported by KeyMaster G3 and DC706, providing locksmiths and automotive technicians with a safer, faster, and non-destructive solution for replacing used Mercedes-Benz TCUs.

With this new feature, technicians can restore a used TCM to factory virgin status via OBD or Bench mode, eliminating the need for risky hardware modifications and greatly improving workshop efficiency.

Supported Functions

The new upgrade will support the following operations:

TCM Virginization

Write VIN

Personalization (Data Transfer)

More functions coming soon...

Supported TCM Types

This solution supports the following Mercedes-Benz transmission control modules:

FBS3 TCM: VGS2 / GS3-NAG2

FBS4 TCM: VGS4-0-NAG2 (7-speed)

These modules can be virginized through OBD or Bench mode using OBDSTAR X300 Classic G3 or DC706.

Why Virginization Is Required

When replacing a used Mercedes-Benz TCM, the module's immobilizer data must be cleared first. This process, known as virginization, resets the module to its original factory state.

Traditionally, the module must then be installed and programmed through online programming or personalization using the original manufacturer’s tools, which can be both expensive and time-consuming.

Drawbacks of Traditional Open-Cover & Soldering Methods

Currently, most available solutions for FBS4 (VGS4-0-NAG2) TCM units require destructive operations, such as opening the module housing, cutting circuits, or soldering wires to read or write the data.

These traditional methods present several disadvantages:

Complex procedures requiring highly skilled technicians

High risk of module damage during cutting or soldering

Time-consuming operations that reduce workshop productivity

Irreversible damage may occur if any step is performed incorrectly, resulting in significant financial losses

Because of these risks, many technicians consider the process difficult and unsafe.

Advantages of the New OBD Virginization Solution

The upcoming OBDSTAR OBD virginization solution offers a much more convenient and secure alternative.

Key advantages include:

No cutting required

No soldering required

Supports OBD and Bench modes

Non-destructive operation

Reduced risk of module damage

Faster and more efficient workflow

Using KeyMaster G3 or DC706, technicians can first read the original vehicle data, then perform TCM virginization and personalization (data transfer).

Once the process is completed, no additional online programming is required. The module can be installed directly into the vehicle, and the engine can be started immediately.

This solution significantly improves workshop efficiency while eliminating the risks associated with traditional hardware-based operations.

Note

The availability of functions and supported models may vary depending on software updates and device configurations.

For more technical support, visit:

www.obd2shop.co.uk

Toyota SKB IMMO Data Read with OBDSTAR X300 Classic G3

When all Toyota proximity smart keys are lost, retrieving immobilizer data from the Toyota Smart Key Box (SKB) is a crucial step before programming new keys. In this guide, we’ll walk you through how to read SKB immobilizer data using the OBDSTAR X300 Classic G3 via OBD mode.

Step-by-Step Procedure

1. Enter IMMO Function

Power on the device and select [IMMO] from the main menu.

2. Select Vehicle Brand

Search for Toyota using the search icon in the top-right corner.

3. Manually Select System

Navigate to:

Manual Select System >> PROXIMITY >> TYPE3

4. Review the Guide

Once you enter the operation interface, select [Guide].

Carefully read through the function introduction, menu description, operating steps, and important precautions before proceeding.

5. Read Immobilizer Data

Select [Read IMMO Data].

Carefully read the safety notes displayed on the screen, then follow the prompts to proceed.

Save the retrieved immobilizer data as instructed by the device.

6. Operation Completed

When the device displays “Operation success,” it indicates that the immobilizer data has been successfully read and saved.

Conclusion

Using the OBDSTAR X300 Classic G3 to read Toyota SKB immobilizer data via OBD mode is a straightforward and efficient solution for all-keys-lost scenarios. By carefully following the on-screen instructions and saving the data properly, you can ensure a smooth key programming process.

For a detailed video demonstration, please visit:

Official website:

www.obd2shop.co.uk