OBDSTAR MOTOMASTER vs. MS80 Motorcycle Tool Comparison

OBDSTAR has a newly released OBDSTAR MOTOMASTER Motocycle Scanner. How is it different from the OBDSTAR MS80? Here, we are comparing them from hardware specifications.

MOTOMASTER vs MS80

1. Operating System

MOTOMASTER: Android 11

MS80: Android 5.1.1

2. OTA, Screen Recording & Wireless Screen Casting

MOTOMASTER: Supports all three (OTA, screen recording, wireless screencasting).

MS80: Does not support any of these.

3. CPU

MOTOMASTER: Quad-core 64-bit Cortex-A55 (2.0GHz, newer architecture).

MS80: Quad-core ARM Cortex A9 (1.4GHz, older architecture).

4. Battery

MOTOMASTER: 9000mAh (larger capacity).

MS80: 3700mAh (smaller capacity).

5. Storage Capacity

MOTOMASTER: 4GB RAM + 64GB storage.

MS80: 1GB RAM + 32GB storage.

6. Display

MOTOMASTER: 8.0-inch fully laminated, sunlight-readable screen.

MS80: 8.0-inch standard screen.

7. Camera

MOTOMASTER: Rear 800W pixels, autofocus.

MS80: Rear 500W pixels, no autofocus.

8. Bluetooth

MOTOMASTER: Bluetooth 5.0.

MS80: No Bluetooth support.

9. External Interfaces

MOTOMASTER: RJ-45, HDMI, TYPE-A, TYPE-C.

MS80: Only TYPE-A.

10. WiFi

MOTOMASTER: Dual-band (2.4GHz/5GHz).

MS80: Single-band (2.4GHz).

11. Vehicle Communication Interface (VCI)

MOTOMASTER: Built-in CANFD, DOIP, Low-Speed CAN, and other protocols.

MS80: Requires external adapters for CANFD and other protocols.

12. RFID

MOTOMASTER: Built-in RFID.

MS80: Requires external hardware (P001).

13. Remote Test

MOTOMASTER: Built-in support.

MS80: Requires external hardware (RT100).

Summary

MOTOMASTER offers a significantly better operating system, hardware, connectivity, and functionality compared to the MS80, which lacks many features and relies on external adapters for extended capabilities.

www.obd2shop.co.uk

Harley Davidson PIN Reading Via OBDSTAR MS80

This post will guide you on how to use the OBDSTAR MS80 Motorcycle Diagnostic Tool to read PIN for Harley Davidson.

The Tools we need:

MS80

Main cable

M041

M002

Spare Battery

Here comes the procedure:

Establishing a connection between the motorcycle and MS80 via the cables.

Click [IMMO]>>[Americas]>>[HARLEY DAVIDSON]>>[HARLEY DAVIDSON V40.30]>>[BCM - Board Control Module]

"Could not read VIN number.

Press [OK] to continue to enter the system or press [Cancel] to end the system."

Here we choose [OK] to continue.

Click [Special Function], and read the notes carefully.

"Note:

1. Some adjustments or settings may cause vehicle failure, therefore our company does not assume any responsibility.

2. It is recommended to refer to the original maintenance data for operation."

Click "Agree" enter the password, and click [PIN read/change], then press [OK] to continue.

Read PIN successfully.

Video guides:

www.obd2shop.co.uk

KTM 1190 Adventure 2014 odometer calibration via OBDSTAR MS80

This article will show you how to use OBDSTAR MS80 motorcycle diagnostic tool to adjust the mileage for the KTM 1190 Adventure 2014.

First, we can see that the mileage displayed on this motorcycle's instrument is "61000" KM.

We can also check the current mileage of the motorcycle through the MS80 tool, the operation path is as follows:

Enter MOTO Diag, enter "KTM" in the search box, and select "KTM V31.18" >> "Diagnosis" >> "Select from vehicle".

Select "1190 Adventure" and click "OK" to continue.

Select "Chassis management system">>"Eldor MCU(2013-)>>"ECU information".

Here you can see that the current mileage of this car is "60992".

Next is the mileage adjustment process.

Click "Back" to go back to the main interface, click "ODO Meter" >> "KTM V31.04" >> "Select from vehicle (BETA)".

Also, select "1190 Adventure" and click "OK" to continue.

Select "One-click Repair" and enter the new mileage, here we enter "20000".

The mileage has been set successfully!

The video for reference: