OBDSTAR MT502 Performs Land Rover Knob Gear Lever Action Test

This post will show you how to use the OBDSTAR MT502 Automotive Compressor Test Platform to do a knob gear lever action test for Land Rover by bench.

The tools we need:

MT502

Main Cable

P004 ECU Clone Jumper

P004 Adapter

Lander Rover Gear Lever Control ECU

Procedure:

Choose [Test Platform] >> [GEARLEVER] >> [GEARLEVER LAND ROVER/JAGUAR]

Click [Guide] in the lower left corner, carefully read the development background and operation methods.

There are two methods to choose from:

Method 1:

The wire in terminal 2 of the T006 wiring harness needs to be cut off and you need to install a 12V control switch yourself or reconnect and disconnect both ends of the cut wire when you click start to control the lifting and lowering of the gear lever.

Method 2:

Use a jumper connection. When you click Start, test the gear lever by plugging and unplugging the jumper of the control power terminal (see the wiring diagram for the control power terminal).

Here we are using method 2, connecting with the ECU jumper

We will test the gear lever by plugging and unplugging the jumper from the control power terminals

Click [Pinout] to view a detailed connection diagram.

Find the wiring diagram for the corresponding module and connect the harness according to the wiring diagram.

The control power is disconnected and turn on the ignition switch of P004.

Click [Start] to test.

Plug in the control power supply

Test that the lift-up, knob functions work properly.

Unplug the control power supply

The lift-down function works properly.

For more details please refer to the video below:

OBDSTAR MT502 Test Toyota Compressor by Bench

OBDSTAR MT502 is a new automotive compress test platform by Bench that can send a CANBUS signal to test and verify compressors. This is testing the Toyota compressor as an example.

Read also:

OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

Accessories

MT502 Test Platform

P004 adapter

Main cable

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Toyota compressor test

Please make sure the OBDSTAR Test Platform is in charge and communication during the whole process.

Procedure

Check the operation video:

https://www.youtube.com/watch?v=c2EyLeTW-gs

Test platform >> Agree >> Compressor >> Compressor V30.28 >> Brand >> GAC-TOYOTA >> GAC-TOYOTA LEVIN DENSO 042400 0171

Click "Guide" & "Pinout" to check operation instructions.

Connect according to the wiring diagram.

It's normal for the current range to fluctuate a little around 280V.

Turn on the ignition switch on the P004 adapter.

Click twice "Start".

The test command has been sent.

(Some compressors start with a delay of more than 10s)

Click "Stop", the test command has stopped sending.

Toyota Compressor driver test operation is completed.

www.obd2shop.co.uk

OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

OBDSTAR MT502 Test Platform can support power on, test, and verify most brands of electric scroll compressors by sending a CANBUS signal. It adopts the latest 3.0 APK operating platform to help automotive technicians to do maintenance.

This is a demo of using OBDSTAR MT502 to test the Tesla Model Y compressor by the bench. 

Tools Required

OBDSTAR MT502

Main cable

P004 adapter

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Tesla Model Y compressor

*Note: please ensure the MT502 test platform is in charging and communication during the process.

Procedure 

Test platform >> Agree >> Compressor >> Latest version >> Brand >> Tesla >> Tesla Model-Y SANDEN 1582668-00-F

Connect according to Guide & Pinout at the bottom left of the screen.

After the harness connection is completed, press "Start".

As we can see, it's normal for the current range to fluctuate a little around 330V.

Turn on the ignition and press "Start".

The test command has been sent.

Now we can observe the change in voltage and current.

Press "Stop" and turn off the ignition.

The compressor driver test is completed.

Video Guides:

www.obd2shop.co.uk