OBDSTAR X300 DP PLUS Program 2022 KIA K5 All Keys Lost

Today I will program 2022 KIA K5 all smart keys lost with OBDSTAR X300 DP PLUS by OBD. The new device OBDSTAR X300 Classic G3 can also do this job. Let's see how it's doing.

CAR IMMO >> HYUNDAI, KIA, GENESIS >> Latest version >> Manual select Model >> KIA >> EUROPE >> K5(DL3) >> 2020-2021 >> PROXIMITY >> Program Smart Keys

This function is available by connecting the service, please ensure the Internet connection is normal.

After this function is executed, all keys will be erased and re-programmed to use.

Please have all the keys ready if you need to perform this function.

Press "Continue".

Turn off the ignition, then open and close the driver's door once.

Please input the pin code: 667094

*The pin code can be read on Key Master DP PLUS.

Press the Enter button, then within 5s, use the top of the proximity key(the end with the indicator) to keep pressing the start/stop button for 5s, and the immobilizer light will flash.

(If the operation fails according to the prompt, please remove the key housing and perform this function again)

Program success.

The number of current keys: 1

Please exit the whole system, and check whether the smart key is programmed successfully or not.

Program complete.

Test the new key, it can normally work.

Done.

www.obd2shop.co.uk

OBDSTAR X300 DP Plus Programs Remotes for KIA Forte 2011

How to program remote keys for KIA Forte 2011 with Obdstar X300 DP Plus? The job can be done just in minutes. Let's see what we need to do.

Step 1:
Open Mobile Keydiy (KD) app installed on your phone and run it to generate a remote (Make sure the Bluetooth in your phone is on).

Step 2:

Press DP on the device screen.

Step 3:
Select Diag Program -> MMOBILISER -> KIA.

Step 4:
Choose your car's version, then wait a few seconds.

Step 5:
You'll go to an interface as below. Choose Select From Type -> Remote -> 16 PIN -> Type1 -> Program Remotes, then wait it communicating.

Step 6: 
Insert the key to switch the ignition on. After that, immediately switch the ignition off and remove the key. Press Enter to continue.

Step 7:
Press the Lock/Unlock button on the key for more than 1 second.

Step 8:
Program succeed! Press Enter to continue if you want to program one more remote.

Step 9: 
Repeat step 7 with another key and all is done!

Would like to try this X300 DP Plus tablet on other vehicles? Visit the link below for more details.
https://www.obd2shop.co.uk/wholesale/original-obdstar-x300-dp-plus-x300-dp-pad2.html