Showing posts with label obdstar d800. Show all posts
Showing posts with label obdstar d800. Show all posts

Monday, 29 January 2024

OBDSTAR D800 Modify Volvo D12 Inboard Motor Total Hours

In this article, we'll show how to modify the Volvo D12 inboard motor total hours with the OBDSTAR D800 Diagnostic Tool.


Required Tools

OBDSTAR D800

Main Cable

4 Meter Extension Cable

M086-VOLVO Dedicated Cable


Connect all cables.

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-1

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-2

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-3

Procedure

Marine Diag >> Inboard >> Europe >> VOLVO >> Latest Version >> Diagnose >> D9-D16 >> OK


Before entering the system scanning, please turn off the power key, wait for 10s, and then turn on the power key.


Warning!

Set the lever to the neutral position.

Before proceeding, make sure that the lever(s) are in a neutral position. Performing operations while driving can cause personal injury.


Information!

Set the helm station in service mode.

For diagnostics of the helm station, it must be set in service mode.


Information!

The Automatic Switch Box(ASB) is not supported for ECU programming. If an ASB is used during identification, the ECU programming will be disabled.


One Drivelines >> Engine Control Unit >> ECU information

Confirm the total engine time(H) is 12.8 hours.

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-4

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-5

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-6

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-7

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-8

Special function >> Agree

Note: 

1. Some adjustments or settings may cause vehicle failure, therefore our company does not assume any responsibility.

2. It is recommended to refer to the original maintenance data for operation.

Please input password 123.

Engine hours, programming >> OK


Warning!

The vehicle/boat must be in a stand still position.


As we can see, the main log total time is 12.8 hours.

Press "Start".


Engine running hours: 12.80h

Please enter a value for the new engine hours: 10 hours.


Follow these steps.

1. Perform engine stop.

2. Click OK.


To perform engine stop:

Using an ignition key - turn the key to its leftmost position.

Using a panel - press the stop button.


Note! Do not use the emergency stop.

Please read the manual for further information about engine stops.


Please power OFF the current driveline.

It might be necessary to power off all drivelines in some cases.

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-9

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-10

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-11

Follow these steps.

1. Ensure that the ignition is ON.

2. Click OK.


Now the Total Engine Hours has been changed to 10 hours.

Successfully modified.


Remember to check if the dash has been successfully modified synchronously.

Done.

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-12

obdstar-d800-modify-volvo-d12-inboard-motor-total-hours-13

www.obd2shop.co.uk

Wednesday, 17 May 2023

OBDSTAR D800 Marine Intelligent Diagnosis Recommendation

OBDSTAR D800 is a new generation diagnostic tool for marine, working for jet skis, outboard, inboard, and generators. Based on the Samsung Exynos processor and the new Android 5.1.1 system, D800 is fast and smooth to be a good helper for marine maintenance engineers.

obdstar-d800-marine-intelligent-diagnosis-recommendation-1

Software

There are 2 software configurations for selection: D800A & D800B



obdstar-d800-marine-intelligent-diagnosis-recommendation


Features

1. Provides complete diagnosis including checking ECU info, reading & clearing codes, data flow, freeze frames, actions test, setting, coding, etc.

2. Record and playback real-time flow, which allows users to accurately locate sensor and component faults.

3. Can work with OBDSTAR APP to get more functions than the D800 device itself. Such as diag socket location, flash code query, technical bulletin, service lamp reset, basic parameters, etc.

4. OBDSTAR technical staff one-click remote assistance.

5. One-click software upgrade via Wi-Fi.

6. Supports advanced functions such as Auto Scan, Active Trim Configuration, Active Trim GPS Configuration, Auxiliary Joystick Configuration, BCM Simulator, Compass Configuration, Device Initialization, Drive Alignment, Helm Setup, Instance Setting, Maintenance Setting, Merc TDS Reset, Remote Control Reset, Set Engine Location, Set Tach Link, Set Tilt Limit, SMUX Congfiguration, Steering Wheel Centering, System Calibration, Torque Adjustment, Trackpad Configuration, Vessel Personality, etc.

obdstar-d800-marine-intelligent-diagnosis-recommendation-2

obdstar-d800-marine-intelligent-diagnosis-recommendation-3

obdstar-d800-marine-intelligent-diagnosis-recommendation-4

obdstar-d800-marine-intelligent-diagnosis-recommendation-5

obdstar-d800-marine-intelligent-diagnosis-recommendation-6

obdstar-d800-marine-intelligent-diagnosis-recommendation-7

obdstar-d800-marine-intelligent-diagnosis-recommendation-8


Supported Brands

EVINRUDE, HIDEA, HONDA, JOHNSON, KAWASAKI, MARINER, MERCURY/MERCURY RACING, PARSUN, SEA-DOO(BRP), SELVA MARINE, SEVEN MARINE, SUZUKI, TOHATSU, YAMAHA...

obdstar-d800-marine-intelligent-diagnosis-recommendation-9

Optional Brands

CATERPILLAR, CFMOTO, CRUSADER ENGINES, CUMMINS MARINE, CUMMINS MERCRUISER DIESEL, DAEDONG, DAF MARINE, FNM MARINE, FORD MARINE, FPT (Fiat Powertrain Technologies), HYUNDAI SEASALL, ILMOR, INDMAR, JOHN DEERE MARINE, KODIAK MARINE, KOHLER POWER SYSTEMS, LOMBARDINI MARINE, MALIBU, MAN MARINE, MARINE POWER, MTU, PANTHER AIRBOATS, PCM Marine Engines, PERKINS, SCANIA MARINE, SISU, STEYR MOTORS, TOYOTA MARINE, VM MOTORI, VOLKSWAGEN MARINE, VOLVO PENTA, YANMAR...


OBDSTAR D800 Diagnose Honda Outboards

Connect D800 to Honda outboard via M001B cable & M015A Honda cable.

Marine Diag >> HONDA >> Latest version >> Diagnosis >> Serial A >> AquaTrax F-12(ARX1200N3) >> ENG >> Honda PGM-FI(2004-) For the US/CANADIAN >> DTC

Here we can read DTC, read the data stream, and do the active tests, and special functions.


Operation video:

OBDSTAR D800 Diagnose YAMAHA Outboards

Connect D800 to YAMAHA outboard via M001B cable & M061 YAMAHA cable.

Marine Diag >> YAMAHA >> Latest version >> Diagnosis >> ENG >> OK

Here we can check ECU info, read DTC, read data stream, and do active tests.


Operation video:

OBDSTAR D800 Diagnose Suzuki Outboards

Connect D800 to Suzuki outboard via M001B cable & M062 Suzuki cable.

Marine Diag >> SUZUKI >> Latest version >> Diagnosis >> Auto identify(CODE)

Here we can check ECU info, read DTC, read data stream, do active tests, and special functions.


Operation video:

www.obd2shop.co.uk


How to Bind Your Device to OBDSTAR APP? (2025 Latest Guide)

This article will guide you through the process of binding your device with the OBDSTAR app to enable seamless integration between the repa...