Wednesday, 18 November 2026

OBDSTAR ECU Master: Read & Write IVECO ZF GS3.3A TCM

The IVECO ZF GS3.3 A transmission control unit (TCM) uses an ST10F276 microcontroller with a 25LC640 external EEPROM. With OBDSTAR ECU Master, you can read and write both the internal FLASH and the external EEPROM on the bench. This guide walks through the whole process.


Tools You Need:

A computer

OBDSTAR ECU Master

A high-power DC regulated power supply

USB cable

Jumper wires

IVECO ZF GS3.3 A ST10F276+25LC640 TCM

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-1

Step 1: Select the ECU Model

Open ECU Master and tap [ECU Flasher] > [HD] > [TCM].

Type the ECU model in the search box at the top-right corner.

Select IVECO ZF GS3.3 A ST10F276+25LC640.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-2

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-3

Step 2: Enter Bench Mode and Open the Guide

Tap [Start], then [BENCH], then [OK].

Tap [Guide] to see tips and connection diagrams for the different adapters.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-4

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-5

Step 3: Connect the ECU

Click [ECU Image] to view the ECU picture.

Click [Connector Pinout] for details, and wire the ECU according to the connector wiring diagram.

Tap Connect. When the prompt appears, tap [Yes].

The left panel will show that the ECU has connected successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-6

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-7

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-8

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-9

Step 4: Read the Data

Read Internal Flash

Tap [Read INT FLASH].

Rename the file and choose the save path if you wish.

The left panel will show that the data was read successfully.

Read External EEPROM

Tap [Read EXT EEPROM].

Rename the file and choose the save path if you wish.

The left panel will show that the data was read successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-10

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-11

Step 5: Write the Data

Write Internal Flash

Tap [Write INT FLASH].

Select the corresponding data file.

When prompted to verify the checksum, tap [No].

The left panel will show that the data was written successfully.

Write External EEPROM

Tap [Write EXT EEPROM].

Select the corresponding data file.

The left panel will show that the data was written successfully.

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-12

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-13

obdstar-ecu-master-read-write-iveco-zf-gs3-3a-tcm-14
Helpful Tips

Always back up the original flash and EEPROM data before writing anything.

Use a stable regulated DC power supply during the whole process. Power interruptions while writing can damage the ECU.

Double-check every wire against the Connector Pinout diagram before tapping Connect.


Video Guide

Watch the full operation here:


Looking for OBDSTAR ECU Master and other ECU programming tools? Visit www.obd2shop.co.uk.

No comments:

Post a Comment

OBDSTAR ECU Master: Read & Write IVECO ZF GS3.3A TCM

The IVECO ZF GS3.3 A transmission control unit (TCM) uses an ST10F276 microcontroller with a 25LC640 external EEPROM. With OBDSTAR ECU Maste...