Good news! OBDSTAR MS80 Motorcycle Diagnostic Tool has launched E-Moto diagnosis software to meet the demands of the growing aftermarket. This is a quick demo on how to diagnose NIU E-Moto battery management & dashboard system.
Tool Required
OBDSTAR MS80 STD
Charger or M002 for charging
Main cable
EM001(NIU diagnosis cable)
*Please keep MS80 in charging during the whole process.
Connection
1. Connect M002 with external battery to supply power for OBDSTAR MS80. The red clipper with positive pole, the black one with negative.
2. Make sure 2 fuses of M002 are working well.
3. Charge MS80 via M002 or charger directly.
4. Connect MS80 with EM001(NIU diagnosis cable) via main cable.
5. Plug EM001 onto its diag socket.
E-MOTO Diag >> NIU >> NIU V30.00 >> Select from system >> BMS info/ DB info
BMS Info
Make sure the power is turned off for more than 10s.
You can also connect diagnostic device to battery pack directly.
The left half of the screen shows battery information. Including state-of-charge(SOC), voltage, charge current, discharge current, values of each temperature sensor...
The other half shows battery quantities & voltage of each battery.
The voltage of each small battery is around 3.65V, which is very average, indicating that the battery is in good condition.
DB Info
Make sure the power is turned off for more than 10s.
Turn the power ON.
We can see its dashboard software version here.
No comments:
Post a Comment