Hyundai/Kia 95910 N7070 Airbag Reset by OBDSTAR P50

This article will guide you on how to use OBDSTAR P50 to reset Hyundai/Kia airbag 95910 N7070 in bench mode.

The tools we need:

Hyundai/Kia Airbag ECU

P50 tablet

Main Cable

P004 Adapter

CANFD Adapter

P004 Jumper

Select "Airbag Reset" >> "Airbag Reset V30.33" >> "Manual Select Model" >> "HYUNDAI/KIA" >> "Auto Search Part Number", then click "Enter" to continue.

Check the part number on the ECU label

Input the part number of ECU (case insensitive, fuzzy search supported)

After entering the part number, select "Enter" to continue.

Press "ESC" to enter CONFIG mode.

Remarks: click the operation instructions at the bottom left to check the best detection method.

Then choose "Pinout", connecting according to the wiring diagram.

Once the device is connected, click on "ECU Information" to view the relevant information.

Then return to the previous interface and click "Read DTC" to check the error code, there is a crash error code.

Then we choose "Erase Crash", this function is available by connecting the server, please make sure the internet connection is normal.

Erase Crash Success, please disconnect the 12v power supply and wait for 30 seconds, and then reconnect the 12v power supply.

Then return to the previous interface and click "Read DTC" again, the crash history has been erased successfully.

The airbag reset is done!

For more detailed steps, please refer to the video: