OBDSTAR P50 Reset Ford EcoSport Airbag ECU on Bench

OBDSTAR P50 Airbag Reset Tool supports one-click reset for 38 brands and over 3000 ECU part number. Such as Audi, Benz, Jaguar, Land Rover, Porsche, Toyota, VW, etc. This is a guide on how to reset Ford EcoSport Airbag ECU with OBDSTAR P50 on bench.

Tools:

OBDSTAR P50

P004 Jumper

P004 Adapter

Ford EcoSport Airbag ECU

Main Cable

Note: please keep P50 in charging & communication in the whole process.

Identify ECU Model

Airbag reset >> Airbag Reset Newest Version >> Auto-Search Part Number

(Can click "Operation Instruction" at the bottom to check the best detection way)

This function is available by connecting the server, please ensure the Internet connection is normal.

Please input the part number(case insensitive), and support fuzzy search.

(Can check the part number on ECU label)

In this case, it's CN15-14B321-BE XC2361A

Connection 

Please click "Diagram" at the bottom to connect cables.

Please set the resistance switch of the P004 adapter to on.

(Different cars are with different airbag ECU, please choose corresponding wiring diagrams)

Connect P004 adapter with main cable & airbag ECU via jumper.

Turn on 120Ω resistance.

Turn on the power button of the P004 adapter.

Airbag Reset Steps:

Read DTC >> Backup EEPROM data >> Erase crash >> Erase DTC >> Read DTC

1. Click "Read DTC" to check the fault code, there's a crash fault code;

2. Before airbag reset, please read & save EEPROM in advance to avoid data loss by the wrong operation;

3. Turn off the P004 adapter power supply for the 30s, and then turn it on;

4. Choose EEPROM data saved to erase crash data;

5. Click "Start" at the bottom to write EEPROM;

6. Turn off the P004 adapter power supply for the 30s, then turn it on again;

7. Click "Erase DTC" to clear the fault code, crash fault code has been erased successfully.

Completed!

http://blog.obd2shop.co.uk/obdstar-p50-reset-ford-ecosport-airbag-ecu-on-bench/