This post will guide you on how to use OBDSTAR X300 Classic G3 to do Chery Tiggo 8 Pro proximity key programming.
The tools we need:
X300 Classic G3
M001 Main Cable
New Key
Procedure:
Connect OBDSTAR X300 Classic G3 to the car through M001 Main Cable
Select [IMMO], enter "Chery" to search, and select [CHERY/COWIN/JETOUR/EXEED]>>[Manual Select Model]>>[TIGGO]>>[TIGGO 8 PRO]>>[PROXIMITY]
Step 1. Read PinCode
Choose [Read PinCode]
Step 2. Program keys
Choose [Program keys]>>[Program new keys]
Information:
If it is a blade key please insert it into the keyhole;
If it is a proximity key. Please put the key to be matched in the sensing area and take the other keys out of the vehicle
The sensing area may be located at:
1. Cup holder (some models require moving the cup holder away)
2. Below the cigarette lighter or USB port
3. Near the gear lever
Put the key matched in the sensing area, and input the PinCode just read.
End of function execution!
The proximity key programming is completed.
Video Guides:
No comments:
Post a Comment