OBDSTAR X300 DP Plus Program 2020 Honda Avancier AKL by OBD

Using OBDSTAR X300 DP PLUS can program 2020 Honda Avancier all keys lost by OBD, which can save a lot of money from replacing a new IMMO box. Follow the tutorial to learn how to do it.

Tools Required

Key Master DP Plus

Main cable

Universal Remote Key

Video Guides:

Procedure

Connect X300 DP PLUS to OBD via the main cable.

We can see the IMMO indicator is on.

Car IMMO >> Honda Acura >> Latest version >> Honda >> Manual select model >> Asia >> Avancier >> Proximity >> Button >> Type 2(2019-)

Double click the Start button, ignition is still off, click "Esc".

(If the ignition is on, please click "Enter".)

Press and hold the Start button until the ignition is on.

The ignition is turned on, please release the engine Start/Stop button.

Smart key >> All smart keys lost

Programming conditions

1. No fault codes.

2. Make sure you have all proximity keys to be programmed.

Make sure the following matters, in order to minimize the noise source when programming the proximity key.

Turn off the switch, such as a navigation system and audio.

Keep the proximity key and the diagnostic tool separately by approximately 1m(3 feet). Close all windows, sunroofs and doors.

Click "Enter".

This function will erase all keys, click "Enter".

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Place a new key to be programmed in the vehicle. Click "Enter".

Double-click the Start button, ignition is still off, click "Esc".

Press and hold the Start button until the ignition on.

The ignition is turned on, please release the engine Start/Stop button.

Is it a new model(2020 or later)? Click "Enter".

This function is available by connecting the server, please ensure the Internet connection is normal.

Input numbers of smart keys to be registered.

Take out all the registered proximity keys from the vehicle (make sure they are 2 meters away from the vehicle).

Only take 1 new smart key into the vehicle within 100s.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Please take this proximity key to be programmed out of the vehicle.

Place the first programmed key back into the vehicle.

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Take out all the registered proximity keys from the vehicle(make sure they are 2 meters away from the vehicle.)

Only take 2 new smart key into the vehicle within 100s.

The smart key has properly been registered.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

IMMO indicator is off, click "Enter".

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Registration has been completed.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not no depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Click "Key quantity" to check.

2 keys are registered in the ECM/PCM.

Test the keys, both can work well.

Done.

This is how to program 2020 Honda Avancier all keys lost with Obdstar X300 DP PAD2.

http://blog.obd2shop.co.uk/obdstar-x300-dp-plus-program-2020-honda-avancier-akl-by-obd/

OBDSTAR MS80 Diagnose NIU E-Moto BMS&DB System

Good news! OBDSTAR MS80 Motorcycle Diagnostic Tool has launched E-Moto diagnosis software to meet the demands of the growing aftermarket. This is a quick demo on how to diagnose NIU E-Moto battery management & dashboard system.

Tool Required

OBDSTAR MS80 STD

Charger or M002 for charging

Main cable

EM001(NIU diagnosis cable)

*Please keep MS80 in charging during the whole process.

Connection

1. Connect M002 with external battery to supply power for OBDSTAR MS80. The red clipper with positive pole, the black one with negative.

2. Make sure 2 fuses of M002 are working well.

3. Charge MS80 via M002 or charger directly.

4. Connect MS80 with EM001(NIU diagnosis cable) via main cable.

5. Plug EM001 onto its diag socket.

E-MOTO Diag >> NIU >> NIU V30.00 >> Select from system >> BMS info/ DB info

 BMS Info

Make sure the power is turned off for more than 10s.

You can also connect diagnostic device to battery pack directly.

The left half of the screen shows battery information. Including state-of-charge(SOC), voltage, charge current, discharge current, values of each temperature sensor...

The other half shows battery quantities & voltage of each battery.

The voltage of each small battery is around 3.65V, which is very average, indicating that the battery is in good condition.

 DB Info

Make sure the power is turned off for more than 10s.

Turn the power ON.

We can see its dashboard software version here.

Tesla Model 3 Airbag Reset with OBDSTAR P50 on Bench

It's a cost-effective way to do airbag reset for vehicles with OBDSTAR P50. Following I'm gonna reset Tesla Model 3 airbag on the bench as an example.

Check full operations on Youtube:

Tools Required

OBDSTAR P50

Main cable

P004 adapter

P004 jumper

Tesla Model 3 Airbag ECU

Tip: Please keep OBDSTAR P50 in charging & communication in the whole process.

Airbag reset >> All >> Airbag reset latest version >> Auto search part number

This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".

Please input the part number (Which can be checked on ECU's label).

* Case insensitive, support fuzzy search.

Please refer to Diagram at the bottom left to connect cables:

1. Connect P50 with the main cable.

2. Connect the P004 adapter with the main cable & airbag ECU via jumper.

3. Turn on the power button of the P004 adapter & 120Ω resistance.

Press "Read DTC".

There's a crash fault code: crash event storage full and lock.

Erase Crash >> Enter

Erase crash success.

Go back to read DTC again.

The crash fault code has gone!

Airbag reset done.

More model tests with OBDSTAR P50 Airbag Reset Tool are to be continued...

http://blog.obd2shop.co.uk/tesla-model-3-airbag-reset-with-obdstar-p50-on-bench/