OBDSTAR X300 DP Plus Program 2020 Honda Avancier AKL by OBD

Using OBDSTAR X300 DP PLUS can program 2020 Honda Avancier all keys lost by OBD, which can save a lot of money from replacing a new IMMO box. Follow the tutorial to learn how to do it.

Tools Required

Key Master DP Plus

Main cable

Universal Remote Key

Video Guides:

Procedure

Connect X300 DP PLUS to OBD via the main cable.

We can see the IMMO indicator is on.

Car IMMO >> Honda Acura >> Latest version >> Honda >> Manual select model >> Asia >> Avancier >> Proximity >> Button >> Type 2(2019-)

Double click the Start button, ignition is still off, click "Esc".

(If the ignition is on, please click "Enter".)

Press and hold the Start button until the ignition is on.

The ignition is turned on, please release the engine Start/Stop button.

Smart key >> All smart keys lost

Programming conditions

1. No fault codes.

2. Make sure you have all proximity keys to be programmed.

Make sure the following matters, in order to minimize the noise source when programming the proximity key.

Turn off the switch, such as a navigation system and audio.

Keep the proximity key and the diagnostic tool separately by approximately 1m(3 feet). Close all windows, sunroofs and doors.

Click "Enter".

This function will erase all keys, click "Enter".

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Place a new key to be programmed in the vehicle. Click "Enter".

Double-click the Start button, ignition is still off, click "Esc".

Press and hold the Start button until the ignition on.

The ignition is turned on, please release the engine Start/Stop button.

Is it a new model(2020 or later)? Click "Enter".

This function is available by connecting the server, please ensure the Internet connection is normal.

Input numbers of smart keys to be registered.

Take out all the registered proximity keys from the vehicle (make sure they are 2 meters away from the vehicle).

Only take 1 new smart key into the vehicle within 100s.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Please take this proximity key to be programmed out of the vehicle.

Place the first programmed key back into the vehicle.

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Take out all the registered proximity keys from the vehicle(make sure they are 2 meters away from the vehicle.)

Only take 2 new smart key into the vehicle within 100s.

The smart key has properly been registered.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

IMMO indicator is off, click "Enter".

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not to depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Registration has been completed.

Turn off the ignition.

(Press the engine Start/Stop button. Be careful not no depress the brake.)

Turn on the ignition.

(Press the engine Start/Stop button twice. Be careful not to depress the brake.)

Click "Key quantity" to check.

2 keys are registered in the ECM/PCM.

Test the keys, both can work well.

Done.

This is how to program 2020 Honda Avancier all keys lost with Obdstar X300 DP PAD2.

http://blog.obd2shop.co.uk/obdstar-x300-dp-plus-program-2020-honda-avancier-akl-by-obd/

OBDSTAR MS80 Diagnose NIU E-Moto BMS&DB System

Good news! OBDSTAR MS80 Motorcycle Diagnostic Tool has launched E-Moto diagnosis software to meet the demands of the growing aftermarket. This is a quick demo on how to diagnose NIU E-Moto battery management & dashboard system.

Tool Required

OBDSTAR MS80 STD

Charger or M002 for charging

Main cable

EM001(NIU diagnosis cable)

*Please keep MS80 in charging during the whole process.

Connection

1. Connect M002 with external battery to supply power for OBDSTAR MS80. The red clipper with positive pole, the black one with negative.

2. Make sure 2 fuses of M002 are working well.

3. Charge MS80 via M002 or charger directly.

4. Connect MS80 with EM001(NIU diagnosis cable) via main cable.

5. Plug EM001 onto its diag socket.

E-MOTO Diag >> NIU >> NIU V30.00 >> Select from system >> BMS info/ DB info

 BMS Info

Make sure the power is turned off for more than 10s.

You can also connect diagnostic device to battery pack directly.

The left half of the screen shows battery information. Including state-of-charge(SOC), voltage, charge current, discharge current, values of each temperature sensor...

The other half shows battery quantities & voltage of each battery.

The voltage of each small battery is around 3.65V, which is very average, indicating that the battery is in good condition.

 DB Info

Make sure the power is turned off for more than 10s.

Turn the power ON.

We can see its dashboard software version here.

Tesla Model 3 Airbag Reset with OBDSTAR P50 on Bench

It's a cost-effective way to do airbag reset for vehicles with OBDSTAR P50. Following I'm gonna reset Tesla Model 3 airbag on the bench as an example.

Check full operations on Youtube:

Tools Required

OBDSTAR P50

Main cable

P004 adapter

P004 jumper

Tesla Model 3 Airbag ECU

Tip: Please keep OBDSTAR P50 in charging & communication in the whole process.

Airbag reset >> All >> Airbag reset latest version >> Auto search part number

This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".

Please input the part number (Which can be checked on ECU's label).

* Case insensitive, support fuzzy search.

Please refer to Diagram at the bottom left to connect cables:

1. Connect P50 with the main cable.

2. Connect the P004 adapter with the main cable & airbag ECU via jumper.

3. Turn on the power button of the P004 adapter & 120Ω resistance.

Press "Read DTC".

There's a crash fault code: crash event storage full and lock.

Erase Crash >> Enter

Erase crash success.

Go back to read DTC again.

The crash fault code has gone!

Airbag reset done.

More model tests with OBDSTAR P50 Airbag Reset Tool are to be continued...

http://blog.obd2shop.co.uk/tesla-model-3-airbag-reset-with-obdstar-p50-on-bench/

OBDSTAR X300 DP Plus successfully renews BMW 868MHz remote

The successful renewal of the BMW 868 MHz remote with OBDSTAR X300 DP Plus has been proven.

How to do it? Let's take a look.

The following tools are required:

X300 DP Plus Pad

X300 DP Plus Main Wire

C001 interface board

W001 cable

P001 Programmer

GODIAG Test Platform for BMW CAS4/CAS4+

BMW 868 MHz remote

Step 1. Insert the BMW remote into the GODIAG test platform card slot, click "CAR IMMO", select the model "BMW" → "CAS4 / CAS4 +", and select "Key Detect", then you can see the relevant information of the remote.

Step 2. Click "Esc" to return to the main interface, select "RFID" → "Renew Key" → "BMW" → "F Chassis" → "868 MHz" → "IN-Circuit HUF5661".

Please connect the wire correctly according to the wiring.

When the connection is complete, click "Enter" to continue.

Writing data, please wait...

Data scrubbing is successful!

For more detailed steps, please refer to the video below:

OBDSTAR P50 vs. SMOK vs. SMARTOBD vs. GromCalc SRS Tool

What's the most recommended airbag reset tool in 2022? Here Obd2shop.co.uk have picked out 4 brands for comparison, to help customers make a reasonable choice.

OBDSTAR vs. SMOK vs. SMARTOBD vs. GromCalc

Difference

1. Price

OBDSTAR P50 < SMARTOBD < SMOK < GromCalcTool

Among them, OBDSTAR P50 is the cheapest, SMARTOBD is little difference, SMOK is higher, GromCalcTool is the most expensive.

2. Coverage

OBDSTAR P50 = SMARTOBD > GromCalcTool > SMOK

Functionally, they're pretty much the same, but the supported vehicle coverage varies. OBDSTAR & SMARTOBD support more than 4300 models, GromCalcTool takes second place, SMOK supports the least.

3. Convenience

OBDSTAR P50 > SMOK = SMARTOBD = GromCalcTool

Only P50 airbag reset tool is a portable Android tablet while the others should connect to a PC. That means Windows system tool depends on computers, which is better to work in shop. In contrast, OBDSTAR P50 can be used anywhere, easy to take along.

4. Accessory

Only OBDSTAR P50 & GromCalcTool are equipped with a high quality universal jumper. SMARTOBD has a general jumper while SMOK does not provide.

5. Update Frequency

OBDSTAR & SMARTOBD are fast while SMOK & GromCalcTool are slower.

Conclusion

To sum up, OBDSTAR P50 is the most cost-efficient SRS tool. As P50 is newly released, it's more intelligent to have wider vehicle range in functions, supports all OBD or Bench methods to reset airbag. Plus steady updates & reasonable price, P50 wins on cost performance.

SMARTOBD CAN Tool is similar to OBDSTAR P50 in function and price, but differs in operating system. Thus, it's less convenient than P50. Also, it needs to pay for annual subscription fee for use. Otherwise, it won't work. View from this aspect, it's less good-value.

Benz ML Series W164 Mileage Correction via Obdstar X300M

Since Obdstar X300M is a good mileage correction tool for modern cars, today I'm gonna show how easy and fast to adjust mileage for a Mercedes Benz. I've disassembled its dashboard from the vehicle and connected it to X300M.

As we can see, the mileage is 210000km now.

Go to: Vehicles >> Cluster Calibrate >> Benz >> Benz V30.35 >> ML series >> W164

Switch ignition on.

Reading mileage...

Current mileage: 210000km, press "ENT".

Input the mileage of the adjustment: 100000km, press "ENT".

Modifying mileage...

Switch ignition off then on.

We can see the mileage has been changed to 10000km.

Mileage adjustment is successful.

This is how to use Obdstar X300M Odometer Correction Tool for a Benz. The procedure may go the same for other vehicles.

Read also:

Mercedes E Class W212 2014 Odometer Adjustment via Obdstar X300M

VW Passat B6/B7/CC Mileage Adjustment via Obdstar X300M

Audi A6 2006 2.7D Mileage Correction via Obdstar X300M

OBDSTAR P50 Airbag Reset Tool Registration and Upgrade

This post will guide you on how to register and update the OBDSTAR P50 Airbag Reset Tool.

Preparation:

1. Connect the power supply to ensure that the device is in a powered state.

2. Connect to WiFi and make sure the network is connected.

Step 1. Click "DiagProgram" on the main interface, then select "Upgrade".

Step 2. Enter the user login page, and click on "Register" to continue.

Step 3. Fill in the information as required to complete the registration.

Step 4. After successful registration, click "Login Now" to enter the login page, and enter your username and password to complete the login.

Step 5. Select the software to upgrade.

Full operation video:

For more information about OBDSTAR P50, please check https://www.obd2shop.co.uk/wholesale/obdstar-p50-airbag-rest-pin-code-tablet.html