This guide provides step-by-step instructions on how to write a new VIN code to the ECU of a 2022 Aprilia RS660 motorcycle using the OBDSTAR MOTOMASTER diagnostic tool.
Tools Required:
M041 Cable
Main Cable
For cable selection and diagnostic port locations, you can also download the OBDSTAR App for quick reference: OBDSTAR App Download.
Step 1: Locate the Diagnostic Port
On the Aprilia RS660, the diagnostic port is located under the seat.
Use the ignition key to unlock and remove the seat from the rear section of the bike.
Step 2: Connect the Device
Connect the M041 cable and main cable to the diagnostic port.
Plug the other end into the MOTOMASTER scanner.
Turn the motorcycle key to the ON position.
Step 3: Select Vehicle Model in MOTOMASTER
On the MOTOMASTER tablet:
Go to [MOTO Diag]
Select [APRILIA]
Choose [APRILIA V33.10]
Tap [Diagnosis] → [By Model]
Select [APRILIA / R / RS / 660 E5 / 2020-]
Perform [Auto Scan] → [Scan ECU]
Step 4: Access ECU Information
Tap [ECU Information] to view the existing VIN and other vehicle data.
Step 5: Write the VIN Code
Select [Special Function] → [Agree]
Choose [Write VIN] → [OK]
Warning: This function overwrites the VIN. Proceed with caution.
Enter the 17-digit VIN code and press OK.
Step 6: Complete the Process
Turn off the dashboard and wait until communication with the ECU ends, then press OK.
Turn the key back ON and press OK to continue.
The system will confirm that the procedure has been completed.
Step 7: Verify the VIN Update
Go back to [ECU Information] to confirm that the VIN has been updated correctly.
You have now successfully written the VIN code on a 2022 Aprilia RS660 using OBDSTAR MOTOMASTER.
For more tools and solutions, visit: www.obd2shop.co.uk.
No comments:
Post a Comment