This post will guide you in using the OBDSTAR X300 Classic G3 Programming tool to disable the immobilizer on a Piaggio motorcycle.
Repair Background:
When encountering issues such as a damaged key chip, signal interference, or anti-theft module failure that prevent the vehicle from starting, you can disable the immobilizer function and use a temporary blade key to start the car.
You can also disable the immobilizer function during vehicle circuit repairs or ECU debugging to avoid interruptions caused by anti-theft lockouts.
The tools we need:
High-power DC regulated power supply
Main cable
ECU Jumper
P004 adapter
PIAGGIO 168 ECU
Before proceeding, you need to upgrade the software to the latest version.
Select [IMMO] >> [ MOTO] >> [PIAGGIO] >> [PIAGGIO V40.31] >> [PIAGGIO]
Slect [Manual Select System] >> [PGQ16/PGV18]
Open the [Guide] section and carefully read the function instructions, menu description, operation instructions, and connection method.
Follow the wiring diagram for the connection.
After completing the connection, read the ECU information to verify its accuracy.
Proceed to read the MAP data and save it after reading.
Tap [IMMO-ON/IMMO-OFF] (Note: This function requires an internet connection to execute.)
Please back up MAPS before changing the IMMO status!
Current IMMO status: ON
CRC check result: success
Turn off the immobilizer?
Click "Yes" to continue.
Operation success.
Above is using OBDSTAR X300 Classic G3 to disable the immobilizer on a Piaggio motorcycle.
For more details, please refer to the video:
.jpg)
No comments:
Post a Comment