OBDSTAR Toyota Odometer Recalibration Support Car List

OBDSTAR upgraded Toyota odometer recalibration to V30.31 in Feb. Added Toyota Camry 2018 XV70 VDO R7F701406. It can be available on OBDSTAR X300 DP PLUS & ODO Master. Noted to keep your software updated for the latest features.

Toyota ODO Adjustment Support Car List

www.obd2shop.co.uk

OBDSTAR MT502 Test Toyota Compressor by Bench

OBDSTAR MT502 is a new automotive compress test platform by Bench that can send a CANBUS signal to test and verify compressors. This is testing the Toyota compressor as an example.

Read also:

OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

Accessories

MT502 Test Platform

P004 adapter

Main cable

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Toyota compressor test

Please make sure the OBDSTAR Test Platform is in charge and communication during the whole process.

Procedure

Check the operation video:

https://www.youtube.com/watch?v=c2EyLeTW-gs

Test platform >> Agree >> Compressor >> Compressor V30.28 >> Brand >> GAC-TOYOTA >> GAC-TOYOTA LEVIN DENSO 042400 0171

Click "Guide" & "Pinout" to check operation instructions.

Connect according to the wiring diagram.

It's normal for the current range to fluctuate a little around 280V.

Turn on the ignition switch on the P004 adapter.

Click twice "Start".

The test command has been sent.

(Some compressors start with a delay of more than 10s)

Click "Stop", the test command has stopped sending.

Toyota Compressor driver test operation is completed.

www.obd2shop.co.uk

OBDSTAR MT101/MT102: Cheap & Good Automotive Drive Test Tool

OBDSTAR has recently developed 2 automotive Bench way drive test tools: OBDSTAR MT101 Automotive Dash Device & MT102 JLR Gear Lever Drive Test Device. Thereinto, MT101 supports more models like Audi, BMW, Porsche, Mercedes, VW, Dodge, and Ford...while MT102 supports Land Rove & Jaguar.

But it is worth mentioning that, both are compact and cheap only £85 to be a good helper for automotive electronic maintenance engineers. The tool can simulate CAN communication to activate the secondary power supply and bring the main unit into the drive. In this way test and verify the main unit.

No more having to buy packs of boot platforms or wiring harnesses for different vehicles, this will save much money.

How to use OBDSTAR MT101?

This uses MT101 to do Audi A6L C7 dashboard power on by bench.

Operation Video:

1. Accessories Required:

OBDSTAR MT101(12V power supply)

MT15 jumper

Audi A6L C7 dashboard

2. Connection

Connect the device by referring to the wiring diagram in OBDSTAR APP:

Dash Pinout >> AUDI >> A6L(C7)

3. Power on Audi Dashboard for Test

Function >> Other function >> Dashboard V30.12 >> Audi >> A6L(C7) >> Start

The dashboard starts normally.

How to use OBDSTAR MT102?

This is taking MT102 to do Land Rover lever power on by bench.

Operation Video:

1. Accessories Required:

OBDSTAR MT102

T006

Land Rover Lever

2. Connection

Connect the device according to the wiring diagram in OBDSTAR APP:

Gear lever pinout >> LAND ROVER/ JAGUAR

3. Power on Land Rover Lever for Test

Function >> Other function >> Gear Lever V30.12 >> Land Rover/ Jaguar >> Start

The lever starts normally, and the gear lever is up!

Press "Stop".

The gear lever is down!

www.obd2shop.co.uk

OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

OBDSTAR MT502 Test Platform can support power on, test, and verify most brands of electric scroll compressors by sending a CANBUS signal. It adopts the latest 3.0 APK operating platform to help automotive technicians to do maintenance.

This is a demo of using OBDSTAR MT502 to test the Tesla Model Y compressor by the bench. 

Tools Required

OBDSTAR MT502

Main cable

P004 adapter

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Tesla Model Y compressor

*Note: please ensure the MT502 test platform is in charging and communication during the process.

Procedure 

Test platform >> Agree >> Compressor >> Latest version >> Brand >> Tesla >> Tesla Model-Y SANDEN 1582668-00-F

Connect according to Guide & Pinout at the bottom left of the screen.

After the harness connection is completed, press "Start".

As we can see, it's normal for the current range to fluctuate a little around 330V.

Turn on the ignition and press "Start".

The test command has been sent.

Now we can observe the change in voltage and current.

Press "Stop" and turn off the ignition.

The compressor driver test is completed.

Video Guides:

www.obd2shop.co.uk

KTM 1190 Adventure 2014 odometer calibration via OBDSTAR MS80

This article will show you how to use OBDSTAR MS80 motorcycle diagnostic tool to adjust the mileage for the KTM 1190 Adventure 2014.

First, we can see that the mileage displayed on this motorcycle's instrument is "61000" KM.

We can also check the current mileage of the motorcycle through the MS80 tool, the operation path is as follows:

Enter MOTO Diag, enter "KTM" in the search box, and select "KTM V31.18" >> "Diagnosis" >> "Select from vehicle".

Select "1190 Adventure" and click "OK" to continue.

Select "Chassis management system">>"Eldor MCU(2013-)>>"ECU information".

Here you can see that the current mileage of this car is "60992".

Next is the mileage adjustment process.

Click "Back" to go back to the main interface, click "ODO Meter" >> "KTM V31.04" >> "Select from vehicle (BETA)".

Also, select "1190 Adventure" and click "OK" to continue.

Select "One-click Repair" and enter the new mileage, here we enter "20000".

The mileage has been set successfully!

The video for reference:

Hyundai/Kia 95910 N7070 Airbag Reset by OBDSTAR P50

This article will guide you on how to use OBDSTAR P50 to reset Hyundai/Kia airbag 95910 N7070 in bench mode.

The tools we need:

Hyundai/Kia Airbag ECU

P50 tablet

Main Cable

P004 Adapter

CANFD Adapter

P004 Jumper

Select "Airbag Reset" >> "Airbag Reset V30.33" >> "Manual Select Model" >> "HYUNDAI/KIA" >> "Auto Search Part Number", then click "Enter" to continue.

Check the part number on the ECU label

Input the part number of ECU (case insensitive, fuzzy search supported)

After entering the part number, select "Enter" to continue.

Press "ESC" to enter CONFIG mode.

Remarks: click the operation instructions at the bottom left to check the best detection method.

Then choose "Pinout", connecting according to the wiring diagram.

Once the device is connected, click on "ECU Information" to view the relevant information.

Then return to the previous interface and click "Read DTC" to check the error code, there is a crash error code.

Then we choose "Erase Crash", this function is available by connecting the server, please make sure the internet connection is normal.

Erase Crash Success, please disconnect the 12v power supply and wait for 30 seconds, and then reconnect the 12v power supply.

Then return to the previous interface and click "Read DTC" again, the crash history has been erased successfully.

The airbag reset is done!

For more detailed steps, please refer to the video:

OBDSTAR X300M Mileage Adjustment on 2011 VW Polo

OBDSTAR X300M Tool is able to do mileage adjustments for the 2011 Volkswagen Polo by OBD successfully. The dash odometer now is 67225km. Next, I'm going to show you guys how easy to correct it.

Plug X300 main cable into OBD2 port, 

Vehicles >> Cluster Calibrate >> VW >> VW V31.74 >> Select from vehicle >> Polo >> 2010(NEC+24C32) >> Read write mileage >> Mileage Adjustment

Please turn the ignition on, and press ENT to continue.

Reading data...

Please enter a filename to save.

The current mileage of 67200km? Press ENTER to continue.

Please input the mileage of the adjustment: 68941km

Confirm the value.

Please turn the ignition on. Press ENT to continue.

Writing data...

Adjustment complete.

As you can see, the dash odometer has already changed.

OBDSTAR X300M Mileage Adjustment on the 2011 VW Polo was done! You may follow the procedure to correct mileage for other models.

Read also:

VW Passat B6/B7/CC Mileage Adjustment via Obdstar X300M

Benz ML Series W164 Mileage Correction via Obdstar X300M

Audi A6 2006 2.7D Mileage Correction via Obdstar X300M