OBDSTAR X300M Tool is able to do mileage adjustments for the 2011 Volkswagen Polo by OBD successfully. The dash odometer now is 67225km. Next, I'm going to show you guys how easy to correct it.
This is a tutorial on how to use OBDSTAR P50 Airbag Reset Tool on bench. Taking the Toyota 89170-0E080 airbag ECU as an example. Read this article to learn how it works.
Accessories Required
OBDSTAR P50
Toyota 89170-0E080 Airbag ECU
P004 Adapter
P004 Jumper
Main cable
Note: Please keep OBDSTAR P50 in charging and communication throughout the whole process.
Airbag reset >> Latest version >> Auto Search part number
This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".
Check the part number on the ECU label to search for it.
Note: before repairing the airbag computer, please carefully check "Operation Instructions" at the bottom left to check the best detection method.
Connect according to the wiring diagram.
Turn on the P004 Adapter ignition switch to check ECU info.
We can see the "Crash Recorded" is YES.
Go to read DTC, there's a crash fault.
Read FLASH(H8SX172x) >> Start
Save the data file.
Click "Erase Crash".
Executing the "Erase Crash" function will clear all flash data. Please ensure that the "Read FLASH" function has been executed. And open the cover to compare all write flash mode wiring diagrams in the "Operation Instructions". There is a picture that can correspond to your ECU.
Otherwise, after executing this function, flash data can only be recovered through the programmer.
Enter >> Enter
Erase crash success. Please follow the wiring diagram of write flash mode, and execute the "Write FLASH" function after removing/welding the resistance.
Turn on the P004 Adapter ignition switch again.
Advanced function >> write FLASH(H8SX172x)
Confirm that the "Write FLASH" operation has been performed after removing/welding the resistance according to the write flash mode wiring diagram.
Enter >> Enter >> Selected data file >> Start
Writing data success.
Please disconnect the 12V power supply of P004(or turn off the ignition) and wait for the 30s, then reconnect the 12V power supply of P004(or turn on the ignition).
Go to erase DTC, then check ECU info again.
As we can see, the "Crash Recorded" has been changed to NO.
The crash fault has been cleared.
The airbag reset is done.
You can also click the video below to view the tutorial:
You might be interested:
OBDSTAR P50 Reset Subaru 98221SG080 Airbag on Bench
OBDSTAR P50 Reset Toyota 89170-60460 Airbag on Bench
OBDSTAR has released Toyota & Lexus IMMO upgrade V32.74, added new models 8A-A8, 8A-A9, 8A-AA, 4A all series add keys & all keys lost key programming by OBD. Works for OBDSTAR X300 DP PLUS, X300 PRO4. No adapter is required or disassembly supports keys from all manufacturers with free Pincode.
Connect Toyota-27 with smart box, and connect CAN direct with OBD.
Operation:
Car IMMO >> Asia >> Lexus Toyota Scion >> Latest version >> Manual select system >> Proximity >> Type 9(8A-AA) >> Read IMMO data >> Operation in the car(CAN DIRECT KIT)
Please connect the diagnostic device, smart key ecu, and vehicle OBD through the CAN DIRECT KIT.
This function is available by connecting the server, please ensure the Internet connection is normal.
Save immo data file.
Make simulated card(key SIM) >> Enter
1. This function can make a simulated key when all the keys are lost(note: simulated key needs to be kept charged, and it needs to be made again after the power is off);
2. The simulated key can replace the original car key to add keys, erase keys and other operations;
3. Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.
Select the saved file >> Connect Key Sim simulator
Generate simulated card successfully.
Restore smart box cable.
Test the Key Sim close to start button. It can start engine successfully.
Now we can use it as an original key to add more keys.
OBDSTAR MT501 is an automotive test platform by BENCH, that supports to power on the dashboard, ABS, gear lever, and A/C(air conditioning) panel without CANBUS communication. Covering Audi, BMW, Benz, Dodge, Ford, Jaguar, Lamborghini, Land Rover, Porsche, Rolls-Royce, Volkswagen, Volvo, etc.
How to use the OBDSTAR MT501 Test Platform?
Follow the operation below to learn:
- OBDSTAR MT501 power on Benz W221 dashboard by Bench
Obdstar X300 DP Plus is supported to program 2018+ 8A-A9 Camry, Lexus, IZOA, CHR, LS add keys & all keys lost with free Pincode by OBD. Need to work with Key SIM, follow the steps below to learn.
Car IMMO >> Asia >> Lexus Toyota Scion >> Latest version >> Manual select model >> LEXUS >> ASIA >> RX series >> Proximity >> 2018-(8A-A9) >> Read immo data >> With gateway 8A-A9 >> OBD
This function is available by connecting the server, please ensure the Internet connection is normal.
Save data file.
2. Make a Simulated Key
Go back to "Make simulated card".
This function is available by connecting the server, please ensure the Internet connection is normal.
This function can generate a simulated card with all keys lost.
Use this simulated card instead of the original car key to approach the start button and turn on the instrument, perform "add smart key" operation.
Make sure the simulated card is fully charged, otherwise the add smart key operation may fail.
Select immo data >> Enter >> Key sim simulator
Please connect key sim simulator.
Generating the A9-type simulated card, please wait for 1-2 minutes...
Generate simulated card successfully.
Move the simulated card close to the start button and try to light the meter. If you can light up the meter normally, use the simulated card instead of the original car key for the "Add smart key" operation.
Now you're allowed to go on adding keys. The operation is also applied to all keys lost situation.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
