OBDSTAR ODO Master has released a major upgrade on KTM & DUCATI motorcycle cluster recalibration function by OBD. Stay updated with OBDSTAR software to get the latest features all the time.
OBDSTAR P50 Toyota airbag reset major upgrade is coming soon! Newly added Toyota R7F7016443, R7F7016843 crash record erase and repair by bench. Need to work with CAN FD Adapter. No more disassembling or reading the MCU, which will save a lot of repair costs.
Why update
1. The new Toyota airbag ECU uses Renesas R7F7016443 or R7F7016843 MCU controller, because the MCU has been encrypted and does not support the programmer to read and write data.
2. Replacement of new airbag ECU is expensive.
3. New airbag ECU requires programming, which is currently only supported by authorized workshops.
Now OBDSTAR P50 has solved the problems that can support repair by bench.
OBDSTAR Toyota-30 Cable for 4A and 8A-BA types IMMO key programming is coming soon! As an exclusive release of the Toyota 30PINC connector, it is easy to operate with no risk. No need to pierce the harness. Compatible with OBDSTAR X300 DP Plus, X300 PRO4.
Functions
1. Proximity key programming(no need pincode).
2. Proximity all key lost (need to use with Key Sim!)
Support Car List
4A models with TMLF19 T-type smart key box:
Yaris 2020+ (XP210)
Yaris Cross 2021+ (XP210)
Corolla Facelift 2022+ (E210)
Corolla Cross Facelift 2022+ (XG10)
*4A models will be updated this month!
8A-BA models with TMLF19D type smart key box:
Sienna 2020+ (XL40)
Harrier/ Venza 2020+ (XU80)
Tundra 2021+ (XK70)
Land Cruiser 2021+ (J300)
RAV4 Facelift 2022+ (XA50)
*8A-BA models upgrade expected in August!
With Toyota-30 Cable, no need to pierce, hook, plug, or unplug the harness during operation, no worry about the risk of damaging communication cables.
OBDSTAR DC706 ECU Tool can support clone Mercedes-Benz GETRAG VGS2-FCVT/FDCT by bench mode. Besides it also supports ECU clone, TCM clone, body, and other clones for Bosch, Continental, GM, FCA, Ford, Siemens, Temic, PSA, etc. Read this article carefully to learn how easy to do.
A major free upgrade on OBDSTAR P50 is coming soon - Battery Reset Upgrade V30.06. Added Audi BMS 8R0915233, and 8R0915591 crash record erase and repair by bench. No disassembly, no risk to save your time and cost!
In Audi A6, A8, and Q5 hybrids, the hybrid battery management unit(BMS) disconnects and logs a P1609 fault code when a crash occurs: (!!! Crash shut-down activated!!!), resulting in the vehicle not starting.
At present, only a few auto electronic repair professionals through the brush firmware or open the cover through the programmer to repair. This way is high fees, risky, and only supports some models. Thus, OBDSTAR releases a free upgrade P50 battery module repair function again!
OBDSTAR P50 supports the BMS crash record(P1609) repair function by bench for the 8R0915233 and 8R0915591 parts. No need to disassemble and read the chip, and no risk and difficulty, which can save a lot of maintenance costs.
Obdstar X300 DP Plus is able to program the 2019 Nissan Sylphy B18 proximity key with a free pin code by OBD. Need to work with NISSAN-40 BCM Cable for the process. Read this guide to learn how to do it.
Check the video to learn:
Preparation
Remove the trim panel under the dashboard and locate the BCM module.
CAR IMMO >> NISSAN INFINITI >> Latest Version >> Manual Select System >> 28 Digital Pincode >> SYLPHY(B18)/SENTRA >> PROXIMITY >> 2019- >> Add Keys(Free Pincode)
This function is available by connecting the server, please ensure the Internet connection is normal. Press "Enter".
This function continues to need to unplug the gateway interface, and then use the dedicated Nissan/Renault 16+32 interface to connect to the unplugged gateway interface.
Press "Enter" to continue.
Note:
1. Executing this function will clear all the keys of the vehicle. The deleted keys must be re-programmed before they can be used normally;
2. Only 2 new keys can be programmed each time. If you need to program more than 3 keys. Please divide them into 2 operations;
3. There must be at least 1 key that can start the vehicle normally;
4. After the 4-button smart key programming is completed, if the transponder and the smart are not normal, please try to Write HEM Confin.
Warning:
1. To ensure that the pincode is successfully read, please turn on the ignition switch;
2. The device must not be disconnected during the pin code reading process. Otherwise, the module will be damaged;
3. Please check the vehicle voltage, line connection, and other conditions to prevent the device from connecting abnormally in the middle.
Press "Enter".
Writing data, please wait for about 5 minutes...
The current 28-digit pincode has been read out.
This pin code can be used when all the keys of the current vehicle are lost to perform key programming operations.
Press "Enter".
Turn on the double flash, and turn off the ignition switch.
Switch the ignition on.
1. Long press the start button to turn off the ignition switch;
2. Turn on the hazard warning lights(double flashing lights);
3. The gear position is in P gear or neutral gear;
4. The steering column lock is in the unlocked state.
Start to read the key ID:
Place the 1st smart key to be programmed(with the mark upward) flat above the ignition switch, the key end with the mark is directly above the ignition switch, and other smart keys are far away from the ignition switch.
Special note:
1. Do not move the key on the ignition switch;
2. Do not press any button of the smart key;
3. Do not insert or remove the blade key in the smart key.
Press "Enter".
New key number: 0
Old key number: 1
Current total key number: 1
Note:
1. Here you need to read all key IDs to be programmed;
2. New keys can only be programmed at most 2 keys, the total number of keys is up to 4; Press "Enter" to read the next key, "Esc" to the next step.
Start programming the key:
Place the 1st smart key to be programmed(with the mark upward) flat above the ignition switch, the key end with the mark is directly above the ignition switch, and other smart keys are far away from the ignition switch.
Special note:
1. Do not move the key on the ignition switch;
2. Do not press any button of the smart key;
3. Do not insert or remove the blade key in the smart key.
Press "Enter".
The key is being programmed, please do not move the key...
Program success.
Number of keys successfully programmed: 1
Follow the following operations to complete the programming functions:
1. Turn off the hazard warning lights(double flashing lights);
2. Press the lock and unlock button of each smart key one by one to verify whether it is normal;
3. Check one by one whether each smart key can be put into the car to start the car;
4. After completing the above operation, press "Enter" to end the function.
After all keys have been verified, please do not exit this function, press "Enter" to continue after completing the operation according to the following prompts:
1. Remove the dedicated Nissan/Renault 16+35 connector and restore the gateway module;
2. Connect the device to the vehicle OBDII connector and turn on the ignition switch.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
