Wednesday, 10 December 2025

OBDSTAR New Arrival: CAN DIRECT-V2 Introducing

The OBDSTAR CAN DIRECT-V2 is a powerful tool designed to bypass gateway modules found in many modern vehicles, providing direct access to the CAN bus when standard OBD diagnostic ports are blocked. This direct connection allows technicians to perform proximity key programming, cluster calibration, CAN frame acquisition, and various automotive repair functions with ease. The device is also fully compatible with third-party diagnostic tools, making it an essential addition for automotive locksmiths and workshops.


Included Components:

1. CAN DIRECT-V2 Main Cable

2. Spiral Wire Piercing Probe (Hook Probe / Back-Probe Pin)

3. JEEP/CHRYSLER Dedicated CAN-C Bus Connector


obdstar-new-arrival-can-direct-v2



IMMO:

TOYOTA/LEXUS (proximity key programming)

Support below (4A) models:

2019- TOYOTA COROLLA

2021- TOYOTA COROLLA CROSS

2021- TOYOTA COROLLA SPORT

2021- TOYOTA COROLLA SPORT HV

2021- TOYOTA COROLLA TOURING

2021- TOYOTA COROLLA TOURING HV

2021- TOYOTA COROLLA HV

2019- TOYOTA LEVIN

2021- TOYOTA LEVIN HV

2021- TOYOTA ALLION

2021- TOYOTA LEVIN


Support below (8A) model:

2021- TOYOTA Yaris Cross


Support below (8A-A8) models:

2018- TOYOTA PRADO

2018- TOYOTA LAND CRUISER

2018- TOYOTA CROWN

2018- TOYOTA HIGHLANDER


Support below (8A-A9) models:

2018- TOYOTA CAMRY

2018- TOYOTA C-HR

2018- TOYOTA IZOA

2018- TOYOTA PRIUS

2018- TOYOTA VELLFIRE

2018- TOYOTA ALPHARO

2018- LEXUS RX450H

2018- LEXUS LC


Support below (8A-AA) models:

2018- TOYOTA HIGHLANDER HV

2018- TOYOTA RAV4

2018- TOYOTA RAV4 HV

2018- TOYOTA AVALON

2018- TOYOTA CROWN KLUGER HV 

2018- LEXUS ES

2018- LEXUS UX

2018- LEXUS RX

2018- LEXUS LS


Support model below:

2021- TOYOTA COROLLA CROSS HV


RENAULT 

2020- RENAULT Clio 5  

2020- RENAULT Captur  

2020- RENAULT Arkana  

2020- RENAULT Kangoo  

2020 RENAULT Espace  

2021- RENAULT Scenic  

2020- RENAULT Zoe

2022- RENAULT Traffic 

2021- RENAULT MEGANE 4 PH2


PSA 

2023- PEUGEOT 308 Prox (For UDS+ systems)

2023- PEUGEOT 208 Prox (For UDS+ systems)


OPEL 

2022- OPEL Astra L (For UDS+ systems)


FCA 

2018- DODGE Charger  

2019- DODGE Ram 

2018- DODGE Challenger

2018- DODGE Durango

2018- DODGE Journey 

2018- JEEP Renegade Prox  

2019- JEEP Renegade 

2019- JEEP Compass Blade

2018- JEEP Compass Prox 

2018- JEEP CHEROKEE

2018- JEEP GRAND CHEROKEE

2018- JEEP WRANGLER

2018- JEEP RENEGADE

2017- CHRYSLER Pacifica Prox  

2015- CHRYSLER 300/300C  

2018- MASERATI models, including GHIBLI, LEVANTE, and QUATTROPORTE, etc.

2018- FIAT models, including 500, 500C, and 500X, etc.

2018- Alfa Romeo models, including GIULIA, STELVIO, and TONALE, etc.


Cluster Calibration Function:

Support below TOYOTA/LEXUS dashboard types:

2019- LEXUS ES S6J3001 DENSO

2023- LEXUS GX550 R7F701401 DENSO

2023- LEXUS LM350H  R7F701401 DENSO

2019- LEXUS LS S6J3001 DENSO

2023- LEXUS LS500 R7F701401 DENSO

2022- LEXUS LX600 S6J3001 DENSO

2023- LEXUS NX R7F701441 DENSO

2023- LEXUS NX350 R7F701401 DENSO

2023- LEXUS RX R7F701441 DENSO

2023- LEXUS RX350 R7F701401 DENSO

2023- LEXUS RX450H R7F701401 DENSO

2023- LEXUS RX500H  R7F701401 DENSO

2018- LEXUS UX S6J3001 DENSO

2019-TOYOTA 4RUNNER S6J3001 DENSO

2019-TOYOTA ALLION S6J3001 DENSO

2023-TOYOTA ALPHARD R7F701401 DENSO

2018-TOYOTA AVALON S6J3001 DENSO

2024-TOYOTA AVANZA R7F701442

2023-TOYOTA AVANZA VELOZ Q S6J3001 DENSO

2023-TOYOTA BX4 R7F701441 DENSO

2023-TOYOTA BZ4 R7F701441 DENSO

2023-TOYOTA BZ4X R7F701401 DENSO

2023-TOYOTA BZ4X R7F701441 DENSO

2024-TOYOTA CAMRY R7F701401 DENSO(80)

2018-TOYOTA CAMRY S6J3001 DENSO

2018-TOYOTA CH-R S6J3001 DENSO

2024-TOYOTA COROLLA  R7F701442

2023-TOYOTA COROLLA R7F701401 DENSO

2018-TOYOTA COROLLA S6J3001 DENSO

TOYOTA COROLLA R7F701441 DENSO

2023-TOYOTA COROLLA CROSS R7F701401 DENSO

2021-TOYOTA COROLLA CROSS S6J3001 DENSO

2024-TOYOTA CROWN R7F701401 DENSO

2018-TOYOTA CROWN KLUGER S6J3001 DENSO

TOYOTA FRONTLANDER R7F701441 DENSO

2019-TOYOTA GRANACE S6J3001 DENSO

TOYOTA GRANVIA S6J3001 DENSO

2020-TOYOTA HARRIER R7F701401 DENSO

2016-TOYOTA HARRIER  S6J3001 DENSO

2019-TOYOTA HIACE S6J3001 DENSO

2023-TOYOTA HIGHLANDER R7F701401 DENSO(70)

2018-TOYOTA HIGHLANDER S6J3001 DENSO

2018-TOYOTA KLUGER S6J3001 DENSO

2024-TOYOTA LEVIN R7F701401 DENSO

2019-TOYOTA LEVIN S6J3001 DENSO

TOYOTA LEVIN R7F701441 DENSO

2019-TOYOTA LINSHANG S6J3001 DENSO

2023 TOYOTA RAIZE S6J3001 DENSO

2023-TOYOTA RAV4 R7F701401 DENSO

2019-TOYOTA RAV4 S6J3001 DENSO

2022 TOYOTA SIENNA R7F701401 FULL TFT

2019-TOYOTA SIENNA S6J3001 DENSO

2018-TOYOTA TACOMA S6J3001 DENSO

2023-TOYOTA TACOMA IV R7F701401 DENSO

2022-TOYOTA TUNDRA R7F701401 DENSO

2023-TOYOTA VELLFIRE III R7F701401 DENSO

2023 TOYOTA VENZA R7F701401 DENSO

2019-TOYOTA VENZA S6J3001 DENSO

2023-TOYOTA VIOS S6J3001 DENSO

2020-TOYOTA WILDLANDER R7F701401 DENSO

2019-TOYOTA WILDLANDER S6J3001 DENSO

2024-TOYOTA YARIS R7F701442

2020-TOYOTA YARIS R7F701441 DENSO

2019-TOYOTA YARIS CROSS S6J3001 DENSO

2019-TOYOTA YARIS IV S6J3001 DENSO

www.obd2shop.co.uk

Thursday, 4 December 2025

OBDSTAR DC706 Guide: Reading & Writing Data for ZOTYE 6DCT360 TCM

This guide demonstrates the procedure for reading and writing Transmission Control Module (TCM) data on the ZOTYE 6DCT360 using the OBDSTAR DC706 ECU Tool (also compatible with Keymaster G3).


Required Tools & Equipment:

OBDSTAR DC706 / Keymaster G3

High-power DC Regulated Power Supply

Main Cable

ECU Clone Jumper

MP001 Programmer

ZOTYE 6DCT360 TCM Unit


obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-1


Step-by-Step Procedure:

1. Preparation & Software

Ensure your OBDSTAR DC706 device is updated with the latest software version.

Launch the ECU Flasher application and select the Passenger Car > TCM category.

Use the search function (top right) to quickly locate the ZOTYE 6DCT360 model.


obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-2

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-3

2. Guided Instructions & Connection

Tap the Guide section. Carefully review the Warm Reminder, Menu Description, Operation Guide, Connection Methods, and Special Notes.

Tap Pinout and select BENCH mode. Verify that the displayed module matches your TCM's appearance.

Tap Connector Pinout and connect your cables to the TCM accordingly, following the diagram.


obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-4

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-5

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-6

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-7

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-8

3. Reading & Writing Data

After completing the physical connections, tap Start.

The tool will now establish communication with the ECU.

First, create a data backup (READ): Always back up the original data first. You can customize the backup file name. The storage location is shown on the left side of the screen.

Write data (WRITE): Proceed to write the required data file into the module. The file management system allows you to filter files by name, modification time, or size.

Verification: If the data file has not been modified, verification is typically not required.

Completion: Once the process is finished, the operation is complete.


obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-9

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-10

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-11

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-12

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-13

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-14

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-15

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-16

obdstar-dc706-read-write-data-for-zotye-6dct360-tcm-17

For a visual walkthrough, follow along with our video guide:


www.obd2shop.co.uk


OBDSTAR New Arrival: CAN DIRECT-V2 Introducing

The OBDSTAR CAN DIRECT-V2 is a powerful tool designed to bypass gateway modules found in many modern vehicles, providing direct access to t...