Thursday, 22 August 2024

Land Rover Knob Gear Lever Action Test by OBDSTAR MT501

This post will guide you on how to use OBDSTAR MT501 to do Land Rover Knob Gear Lever action test by bench.


Check the video here:


The Tool we need:

MT501

Main Cable

P004 ECU Clone Jumper

P004 Adapter

Land Rover Gear Lever Control ECU

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-1

Procedure:

Choose [Test Platform] >> [GEARLEVER] >> [GEARLEVER V30.15] >> [GEARLEVER LAND ROVER/JAGUAR].

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-2

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-3

Then click [Start] >> [Guide] in the lower left corner, and carefully read the development background and operation methods.

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-4

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-5

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-6

There are 2 operation methods and here we are using method 2, connecting with the ecu jumper.

We will test the gear lever by plugging and unplugging the jumper from the control power terminals.


Click [Pinout] to check the diagram.

Connect the harness according to the wiring diagram.

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-7

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-8

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-9

The control power is disconnected and turn on the ignition switch of P004.

Click [Start] to test.

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-10

Plug in the control power supply.

Test that the lift-up, knob function works properly.

Unplug the control power supply, and the lift-down function works properly.

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-11

land-rover-knob-gear-lever-action-test-by-obdstar-mt501-12

www.obd2shop.co.uk

Friday, 16 August 2024

OBDSTAR Mileage Calibration Software Update for SMART/ RENAULT/ HYUNDAI/ KIA

OBDSTAR Cluster Calibration Software has recently been upgraded for SMART, RENAULT, and HYUNDAI/KIA models. Read on to find out more details.


SMART [Version: V40.94]

Add Read/Write FLASH and Mileage Calibration functions for SMART BR453 MONOCHROME 2014-


RENAULT [Version: V41.11]

Add Read/Write flash and Mileage Calibration functions for the below models:

RENAULT TWINGO III TYPE 3 (2021-EV MONOCHROME)

RENAULT TWINGO III TYPE 4 (2014- MONOCHROME)


HYUNDAI/KIA [Version: V41.40]

Add ECU information, Mileage Calibration, Erase DTC, and Read/Write EEPROM functions for KIA K3 2024-R7F701421.


Supported Tools:

ODO Master

X300 Classic G3

X300 Mini Renault/Dacia

obdstar-mileage-calibration-software-update

Note: The software updates may be different depending on the product configurations.

For more details, please get in touch with us:

Email: Sales@obd2shop.co.uk

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Skype: OBD2Tool.co.uk


www.obd2shop.co.uk

OBDSTAR Auto IMMO Software Update for ROEWE/ BYD/ GREATWALL

OBDSTAR Auto IMMO Software has recently been upgraded for LYNK&CO, ROEWE, BYD, GREAT WALL, TRUMPCHI, and CHERY models. Read on to find out more details.


LYNK&CO [Version: V40.33]

Add the Get CEM Module Security Data function for the below models:

01 PROXIMITY

01 HYBRID PROXIMITY

02 PROXIMITY

02 HYBRID PROXIMITY

02 Hatchback PROXIMITY

03 PROXIMITY

03 HYBRID PROXIMITY

05 PROXIMITY

05 HYBRID PROXIMITY

06 PROXIMITY

06 HYBRID PROXIMITY


ROEWE [Version: V42.20]

1. Add proximity key programming function for MG MG7 2023-.

2. Optimized software.


BYD [Version: V40.63]

Add BYD F3 PROXIMITY Key Program Or Clear with PinCode.


GREAT WALL [Version: V42.29]

1. Add proximity key programming function for HAVAL H6 (3DN).

2. Add Read Pincode function for HAVAL H2 TYPE2.

3. Optimized software.


TRUMPCHI [Version: V40.53]

1. Add proximity key programming function for the below models:

ALON Y PLUS

HYPER SSR

2. Optimized software.


CHERY [Version: V40.96]

Add Read PinCode function for the below models:

JETOUR X70 PROXIMITY

JETOUR X70 PLUS PROXIMITY

JETOUR X70S PROXIMITY

JETOUR X90 PROXIMITY

JETOUR X90 PLUS PROXIMITY

JETOUR X95 PROXIMITY

JETOUR DASHING PROXIMITY

EXEED RX PROXIMITY

ARRIZO 5 PROXIMITY

ARRIZO 7 PROXIMITY

ARRIZO GX/EX PROXIMITY

KAIYI C3 PROXIMITY

KAIYI C3R PROXIMITY

KAIYI E5 PROXIMITY

KAIYI V3 PROXIMITY

KAIYI X3 PROXIMITY

KAIYI X3 PRO PROXIMITY

KAIYI X5 PROXIMITY

CHERY E3 PROXIMITY

TIGGO 3X PROXIMITY

TIGGO 5 PROXIMITY


Supported Tools:

X300 DP PLUS

X300 Classic G3

X300 PRO4

obdstar-auto-immo-software-update

Note: The software version for DP PLUS is different from the above, and software updates may vary depending on the product configurations.


For more details, please get in touch with us:

Email: Sales@obd2shop.co.uk

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Skype: OBD2Tool.co.uk


www.obd2shop.co.uk

Wednesday, 14 August 2024

OBDSTAR X300 Classic G3 Program 2024 Mazda CX-5 All Keys Lost

Today we'll demonstrate how to program the 2024 Mazda CX-5 all keys lost with OBDSTAR X300 Classic G3 by OBD.

obdstar-x300-classic-g3-program-2024-mazda-cx5-1

Tools Required:

OBDSTAR Key Master G3

2 Blank Keys

Main Cable


Operation

Connect the device to your vehicle with the main cable.


IMMO >> MAZDA >> Latest Version >> Manual Select Model >> CX-5 >> PROXIMITY >> 2018- >> TYPE 1 >> All Smart Keys Lost

obdstar-x300-classic-g3-program-2024-mazda-cx5-2

obdstar-x300-classic-g3-program-2024-mazda-cx5-3

obdstar-x300-classic-g3-program-2024-mazda-cx5-4

obdstar-x300-classic-g3-program-2024-mazda-cx5-5


All the smart keys out of the car 1 meter away.


Press and hold the vehicle start button for 10s, Start button indicator lights from green to yellow. Press the start button again, and turn on the instrument.


Instruction

All smart keys will be erased.

Mini keys are required: 2


Is ignition status open? Yes

When figuring out how to configure the system, please wait for about 7 minutes. After 7 minutes, the speaker will ring.


Current number of smart keys: 0

Switch the ignition off.


Note:

Turn on the ignition.

When the indicator of the start button turns green(within 5 seconds), attach the marker side of the smart key to the start button!


The current number of keys: 1

The program is successful, do you want to program the next one? Yes

Just repeat the operation as before.

The current number of keys: 2

Press No to continue.

obdstar-x300-classic-g3-program-2024-mazda-cx5-6

obdstar-x300-classic-g3-program-2024-mazda-cx5-7

obdstar-x300-classic-g3-program-2024-mazda-cx5-8


You have to complete the following procedure, before the engine can be started:

1. Switch ignition off.

2. Put on the brakes, turn all the programmed keys to the start button to start the engine for 3s, then switch the ignition off.

Program complete.


Test the keys, both can work successfully.

Done.

obdstar-x300-classic-g3-program-2024-mazda-cx5-9

www.obd2shop.co.uk


Monday, 5 August 2024

OBDSTAR X300 DP PLUS/Classic G3/P50 Crash Reset Upgrade

OBDSTAR Crash Reset Software Major Upgrade Version: V31.00 has been newly released and added 241 part No and optimized the functional process of R7F701A033 models. Now it's available on OBDSTAR X300 DP PLUS, X300 Classic G3 & P50.


Airbag Reset Version: V31.00

1. Add 241 part NO. Again!!!(12200+ part No. supported)

Add 207 part numbers for the below models to support airbag reset:

ACURA 95640(1 part No.)

AEOLUS SPC560P40(2 part No.);

AITO R7F701A033(1 part No.);

ALFAROMEO 95256(1 part No.);

AUDI 95640 (2 part No.);

BMW 9S12XET512(1 part No.);

BUICK(1 part No.);

CADILLAC (1 part No.);

CHANGAN R7F701A033(2 part No.);

CHEVROLET 95160, MAC7242, R7F701008(8 part No.)

DODGE 95256(1 part No.);

FORD TC22XX-16F,XC2336A(4 part No.);

GEELY XC2336A-72F(1 part No.);

GREATWALL TC222S-16F(2 part No.);

HAIMA SPC560P40(5 part No.);

HANTENG SPC560P40(5 part No.)

HONDA95640, H8SX1725, MPC5604, R5F2154, SPC560P50, SPC56AP54, TC23XX-32F(33 part No.)

HYUNDAI 95512, TC23XX-32F, XC2361A(7 part No.);

INFINITI TC22XX-16F (1 part No.);

JAC SPC560P40 (5 part No.);

JEEP 95512 (2 part No.);

JMC R7F701008 (1 part No.);

KIA 95256, 95512, R7F701019, R7F7015803, XC2336A(8 part No.):

LEAPMOTOR R7F701009 (1 part No.);

LEXUS R7F701A223 (3 part No.);

LYNK&CO R7F701330(1 part No.);

MAXUS R7F701009(1 part No.);

MAZDA TC23XX-16F (1 part No.);

MG R7F701009(1 part No.);

MITSUBISHI TC22XX-16F (1 part No.);

NISSAN 95128, TC22XX-16F(8 part No.);

OPEL 95160, 9S12DG128 5 part No.);

PORSCHE 95640(1 part No.);

RENAULT 95128, 95160, R7F701042X, TC22XX-16F(7 part No.);

ROEWE TC224L-16F (3 part No.);

SEAT 11E9 (1 part No.)

SGMW R7F70100X(1 part No.);

SMART SPC560P50(1 part No.);

SOUEAST SPC560P40(11 part No.)

SUBARU 93C46, 93C56, 93C57, 93C66, 93C86, H8SX, H8SX1725, H8SX1726, R7F7010643(23 part No.);

SUZUKI H8SX1725, R7F7010183, XC2336B (13 part No.)

TOYOTA H8SX1725, H8SX1797, R7F7016443, R7F701A223(10 part No.):

TRUMPCHI SPC560P34 (3 part No.);

VOLVO R7F701330(2 part No.);

VOYAH R7F701018(1 part No.)

VW R7F7010423, SPC560P50, TC224L-16F(3 part No.):

ZOTYE SPC560P40 (10 part No.);


Add 34 part numbers for the below models to support Read/Erase DTC:

AUDI 95128, 95320, TC27XX-64F(4 part No.):

CHANGAN TC222S-16F (3 part No.)

CITROEN TC222S-16F(1 part No.);

DODGE 95640 (1 part No.)

FIAT 95320, TC23XX-32F(5 part No.);

FORD 95160(1 part No.)

GREATWALL R7F7010643(1 part No.);

MITSUBISHI 95640(1 part No.)

SUBARU R7F7016863(2 part No.);

TOYOTA 93C66, CYT2B93BAC, R7F701330, R7F7016843, R7F701A313, R7F701A403(14 part No.);

VW TC23XX-32F(1 part No.);


2. Optimized the functional process of all vehicle models R7F701A033.

obdstar-x300-dp-plus-classic-g3-p50-crash-reset-upgrade

www.obd2shop.co.uk

OBDSTAR ISUZU/HYUNDAI/KIA Cluster Recalibration Upgrade

OBDSTAR has released ISUZU/HYUNDAI/KIA Cluster Recalibration Software Major Upgrade this month. Now it's available on OBDSTAR ODO Master...