OBDSTAR MT203 CAN Driver/Gateway Simulator Is Coming!

Good news! OBDSTAR MT203 CAN Driver/Gateway Simulator will arrive next month and can accept pre-orders now. It's an automotive electronics maintenance and repair tool to support the dash, audio, gear lever, AC panel, and other test functions. It provides CAN driver and gateway simulation functions for multiple vehicles.

OBDSTAR MT203 is a compact device and a good helper for automotive electronics maintenance engineers!

Application

Automotive electronic ECU repair(airbag, dash, BCM, and other modules simulation gateway diagnostic test by BENCH) 

Automotive electronic ECU repair(dash, audio, gear lever, AC panel, and other modules CAN drive test by BENCH)

E-Car components repair(compressor, DCDC, on-board charger, and other modules simulation gateway diagnostic test by BENCH)

Advanced Functions

Using STM32H723 high-performance MCU, fast running speed;

Support standard CAN, low speed(fault-tolerant CAN), CANFD protocols;

Automatic scanning, manual baud rate selection, custom input baud rate, and other modes to simulate different types of gateways;

Integrated design, comes with 120Ʊ resistor switch, easy to operate;

A simple and intuitive menu allows you to master the device operation quickly;

Mini USB upgrade cable directly connected to the PC for one-key upgrade.

Supported Protocol Types/Functions

Gateway Supported Protocols

Standard CAN/Standard CAN

500K/250K

500K/125K

Custom Baud Rate

Standard CAN/CAN FD

500K/5M

500K/2M

Custom Baud Rate

Standard CAN/Tolerant CAN

500K/83.3K

500K/100K

500K/125K

125K/125K

Custom Baud Rate

CAN Driver-Supported Functions

Supports dash, audio gear lever, AC panel, and other test functions for the below models:

AUDI, FORD, PORSCHE, BENZ, JAGUAR, ROLLS-ROYCE, BMW, LAMBORGHINI, VOLKSWAGEN, DODGE, LAND ROVER, VOLVO...

www.obd2shop.co.uk

OBDSTAR X300 DP PLUS Program 2022 KIA K5 All Keys Lost

Today I will program 2022 KIA K5 all smart keys lost with OBDSTAR X300 DP PLUS by OBD. The new device OBDSTAR X300 Classic G3 can also do this job. Let's see how it's doing.

CAR IMMO >> HYUNDAI, KIA, GENESIS >> Latest version >> Manual select Model >> KIA >> EUROPE >> K5(DL3) >> 2020-2021 >> PROXIMITY >> Program Smart Keys

This function is available by connecting the service, please ensure the Internet connection is normal.

After this function is executed, all keys will be erased and re-programmed to use.

Please have all the keys ready if you need to perform this function.

Press "Continue".

Turn off the ignition, then open and close the driver's door once.

Please input the pin code: 667094

*The pin code can be read on Key Master DP PLUS.

Press the Enter button, then within 5s, use the top of the proximity key(the end with the indicator) to keep pressing the start/stop button for 5s, and the immobilizer light will flash.

(If the operation fails according to the prompt, please remove the key housing and perform this function again)

Program success.

The number of current keys: 1

Please exit the whole system, and check whether the smart key is programmed successfully or not.

Program complete.

Test the new key, it can normally work.

Done.

www.obd2shop.co.uk