OBDSTAR MT502 Test Tesla Model Y Compressor by Bench

OBDSTAR MT502 Test Platform can support power on, test, and verify most brands of electric scroll compressors by sending a CANBUS signal. It adopts the latest 3.0 APK operating platform to help automotive technicians to do maintenance.

This is a demo of using OBDSTAR MT502 to test the Tesla Model Y compressor by the bench. 

Tools Required

OBDSTAR MT502

Main cable

P004 adapter

P004 ECU clone jumper

High voltage jumper

High voltage DC power

Tesla Model Y compressor

*Note: please ensure the MT502 test platform is in charging and communication during the process.

Procedure 

Test platform >> Agree >> Compressor >> Latest version >> Brand >> Tesla >> Tesla Model-Y SANDEN 1582668-00-F

Connect according to Guide & Pinout at the bottom left of the screen.

After the harness connection is completed, press "Start".

As we can see, it's normal for the current range to fluctuate a little around 330V.

Turn on the ignition and press "Start".

The test command has been sent.

Now we can observe the change in voltage and current.

Press "Stop" and turn off the ignition.

The compressor driver test is completed.

Video Guides:

www.obd2shop.co.uk

KTM 1190 Adventure 2014 odometer calibration via OBDSTAR MS80

This article will show you how to use OBDSTAR MS80 motorcycle diagnostic tool to adjust the mileage for the KTM 1190 Adventure 2014.

First, we can see that the mileage displayed on this motorcycle's instrument is "61000" KM.

We can also check the current mileage of the motorcycle through the MS80 tool, the operation path is as follows:

Enter MOTO Diag, enter "KTM" in the search box, and select "KTM V31.18" >> "Diagnosis" >> "Select from vehicle".

Select "1190 Adventure" and click "OK" to continue.

Select "Chassis management system">>"Eldor MCU(2013-)>>"ECU information".

Here you can see that the current mileage of this car is "60992".

Next is the mileage adjustment process.

Click "Back" to go back to the main interface, click "ODO Meter" >> "KTM V31.04" >> "Select from vehicle (BETA)".

Also, select "1190 Adventure" and click "OK" to continue.

Select "One-click Repair" and enter the new mileage, here we enter "20000".

The mileage has been set successfully!

The video for reference: